That is a good price for a complete wheel. Any idea what the hub offsets will be? I hope no issues arise with aligning your brake rotor and chain/sprockets. If the cush rubbers are really OEM sized that is good so no worries about availability in years to come. Did they tell you what the width of the rim is? Please post back your findings when you install. _
2.15 rim width It should be no different than mounting the ktm lc4 cush hub. I might not have one immediately but a few mates are getting them and will check them more closely.
Nice find! So a change of wheel bearings, ktm sprocket and make up some spacers. A much lower priced alternative for sure. There are some standard Husky wheel sets in their store. I wonder if they could be convinced to make up some Husky cush set ups? Probably not.....
I think the 690 uses a 25mm rear axle same as husky. As for husky cush set ups To quote the seller Is it correct that the 510 wheels interchange with the 630?The bearing numbers match.If they do i could contact them and ask for some cush versions of the 510 enduro wheels they sell. Could be a bolt on,sounds too easy.
If this pans out maybe a group buy could be set up with the seller. I bet we could get a dozen or more to sign up pretty quick. Might be additional savings for all as well. _
Curious as to the quality of those Chinese wheels... I order plenty of stuff from China directly... but wheels... I don't know.
Warp 9 wheels are made in China and i haven't heard any bad reviews. I can't say for sure but I haven't had any problems with the two rear 2.15 X 18s I have. One of the wheels was owned by a member here who had to send it back because he let the spokes get loose and the rim and spokes got trashed. They rebuilt the wheel no questions and no charge. How the wheels and hubs compare to the Warp 9s I have no idea though. The Chinese can make quality stuff if they want to. I wonder if these wheels are made from a high alloy like 7061 the way Excels and Warp 9s are?
I'm well aware of Warp 9 being made in China... For all we know, those wheels direct from China could be a rejected batch of Warp 9s that didn't meet their needs. Most of the time, direct from China means it's rejected product that a company elsewhere didn't want to sell.
Yeah, we agree on that. As a side note, Husky hubs on the MX Racing store website are different that the Warp 9 hubs that I have. Looking around the store I see the wheels are supposed to be 7050 T6 and the hubs are 6061 T6.
Here's a bit more info on the company http://crbmotor.en.alibaba.com/ I am also aware of certain suppliers trade practices regarding quality and consistency.Have heard a few good reports on these wheels regarding quality.But like anything you could get a lemon.
I recently bought the set of back up wheels from Lukas of the Husaberg Adventure Team for my FE570S and it has a Haan cush hub. If I get some free time this weekend, I'll see if it will fit the TE630 and if everything aligns up right. I've also got a cush hub on my FS570 supermoto I could try......
I do know a te610 cush wheel fits onto a 570[picture below]. How its done thanks to Barry for this info
