number decals that match stock ?

[DTX915]

Going racing this year and Huskys program says that I have to keep stock decals on the bike. I am fine with that. Now before I go and spend some money,do any of you know of any company that has a number background that matches the stock wr125 pattern on a 2013.

Be nice if i would blend in on the same lines that come off the shrouds and go down the side panels. I like the t9 that decal works has and if i cannot find another will go with that.
Thanks

 

[Kyle Tarry]

Why not just add number stickers to the number plates and retain all of the stock graphics?

 

[DTX915]

I have to use stock graphics per Huskys contingency program. Like i said in my first post.Just want the number panels to flow from the stock shrouds to the side number panel. Didnt know if anyone has had someone make them yet.

 

[Kyle Tarry]

I am saying, keep the stock graphics, and just put stick-on race numbers in the big empty white spaces on the number panels. That's what they're for, right?

 

[Clete]

I am saying, keep the stock graphics, and just put stick-on race numbers in the big empty white spaces on the number panels. That's what they're for, right?

Funny sh.t!!

 

[DTX915]

Funny sh.t!!

yep

 

[Kyle Tarry]

What am I missing here, guys?

 

[Phoenix]

Honestly, I think they are mostly referring to the tank shrouds with Husqvarna logo and design, but you could check with Jenna that administers the program if you want to be positive. I ran blue number plates last year while on the contingency program. I've never seen any pre-designed templates that mimic the stock style.

 

[Joedints]

I just buy the proper colored "background" kits, the ones with 3 rectangular sheets inside for about $20. Trim them out to look like they belong on top of the side number plates and my headlight. Then buy the proper colored numbers and stick them on top.. As a bonus it keeps the plastic looking better also...

for my son who raced 2 different series, I have the bike done the way above for one series then for the other I just place numbers on colored paper, trim them up, use clear tape front and back and tape them to the side panels and number plate on top of the other numbers. Then I can take off and replace as needed only because he needs different colors for each series

 

[DTX915]

Honestly, I think they are mostly referring to the tank shrouds with Husqvarna logo and design, but you could check with Jenna that administers the program if you want to be positive. I ran blue number plates last year while on the contingency program. I've never seen any pre-designed templates that mimic the stock style.

Yay i was just checking as someone else may have done it. May ride out next week and get a local decal company to set one up. I know its only three little red lines but i woud like them on the number background.
Cannot ride fast so i gotta look good doing it !

 

[DTX915]

 

[DTX915]

Ok so I just got this little project finished up this week. I didn't think this was all that hard. The first set was the wrong size and fit so Steve at STS offered to remake them with a new template.
About two weeks ago I got a phone call that the new templates are in and side decals will be at the track for me next race. I get to the track and get the bad news that the new templates don't fit. The he asks to take my side panels with him to size them. As I was good with that off they went after the mud race.
STS now has a proper fitting template for the 2013 wr/cr 125 on hand with the little red lines to match the stock shrouds.
http://www.sts-motorsports.com/