Decal Works

[ridemore]

Got my new decal Works (decalmx.com) full kit today. Awesome! They are one of the few companies I see that have very cool, Husky specific kits. The online color selection program they have lets you select countless color combinations and shows it on a model bike instantly so you know exactly what your getting and how it looks before you buy it.
Highly recommended.
Arrives very protected and flat, not like my factory ordered kit. That one was bent and curled up on the ends and doesn't even fit properly. Most of the good ones in the Special order catalog are no longer available from Husky I have found out.

Just a good option to check out. I'm happy.

Application. Dry or windex way?

 

[Phaeton]

Bring on the pics!

 

[Steve Kanya]

Windex works awesome.

 

[Dirtdame]

All three of my Husqvarnas wear the Decal Works.

 

[TemecuCoastie]

They do really good work. Check out my bikes to the left.

 

[Motosportz]

They do really nice work and quality is top notch.

 

[robertaccio]

wet method is best.
Decal MX on the TE310 (T3 graphics preprint kit with personal number plate graphics)

 

[K5PL5]

Filled an old windex bottle with warm water and also used a hair dryer to soften up the decals a little before placing them on the plastic. New plastics which I cleaned with a good contact cleaner from Moose-safe for plastics, and then a light mist of water on the plastic before laying the graphics on and squeejee-ing out the air bubbles.

 

[K5PL5]

Arrives very protected and flat, not like my factory ordered kit. That one was bent and curled up on the ends and doesn't even fit properly. Most of the good ones in the Special order catalog are no longer available from Husky I have found out.

I made the mistake of buying a factory decal kit a couple years ago. No good.

 

[TemecuCoastie]

I have Decal Works on the Husky and YZ. The Husky is a mix of Black Bird and Decal Works.

 

[Buster714]

I used one of their templates to make this too. Good quality stuff and it was spot on with the design I provided. I read up on applying graphics and they say to stay away from Windex (even though that's what everyone does) because it weakens the adhesive. I used a spray bottle with water and a little baby shampoo for a wet application and it was pretty easy. A blow dryer definitely helps to get into all the corners and work the water out once a piece is in the right place. I ended up making a few extra slices to get it perfect, like the horizontal chop I made at the end of the radiator guard on the left. I added individual stickers where you see logos (with the exception of all the Solo Moto logos that were produced with the graphics). I'm pretty happy with the result.

 

[ajaxauto]

I use Matt at Avik avik.com made my old bike look new

 

[ajaxauto]

Here are a few more from Avik

 

[K5PL5]

I use Matt at Avik avik.com made my old bike look new View attachment 37577

Looks killer!

 

[Xriderdown]

There's nothing like the original.......DecalWorks. They are great folks to deal with as well.

 

[ncgrecon]

Got mine the other day for my 2009 TE310. Not Crazy about the fitment, they were a bit off. Also they sent the wrong headlight graphic. I sent them a picture and they told be I must have put a new headlight on or had a European version????? I sad no and then after a couple of day they figured it out. They should be in early next week, I will post up some pics when done.

 

[Pepper]

Does anyone know if the yz blue is a good match for the blue on a 2006 te 510. Was also thinking rm yellow and wondering if the dark grey matched the factory tank?

 

[TemecuCoastie]

Just put these on tonight. The picture quality is a littl fuzzy. And, yes, I know the bike is dirty. Went riding Sunday and haven't had the chance to wash it up.



I'm such a Lifer (note the Coast Guard shield)



Ya, a total Lifer....



And one more for the road.

 

[husky jim]

New Graphics from Decal Works came in yesterday.
Sean at Decal Works was reallly good to work with!

 

[Pepper]

Nice look. What colours are those?