• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

2010 TE250 starter issues...Any one else?

D

DougW

Husqvarna
AA Class
I'm now on my second starter. The dealer replaced the original starter and now this one as well (2weeks old) is acting up. When the bike gets warm after riding it, the starter struggles to turn the bike over, to the point it sometimes will not spin at all. This morning I rode for a total of 10 minutes before it wouldn't start. I can be in neutral, and will not feel any resistance with the clutch dragging. The battery had been replaced with the new yusa replacement. The measured voltage is good. Also, the bike will not kick start either. That seems free to turn over so the engine doesn't seem to be sticking anyplace.

Any one else having any issues like this?

Thanks
 
check valve clearances maybe,my dealer has said that bike will get hard to start when clearances start to close up.how many k's have you done
 
I have maybe 2 hours on the bike since the dealer replaced the head. I realize that this is a leap, but I can only assume that they re gaped the valves when they did replace it. however I should check that because the 2 starters have been replaced since the head replacement.

As for the battery it doesn't seem likely to me. After returning home tonight and the bike was cool, I was able to restart the bike multiple times in a row with no issues. If the battery was low on juice, I would think it would eventually just spin slower during the restarts. The problem that happened today was I started the bike, road about 10 min, and stopped, then tried a restart.

Thanks for the input.
 
I'd suggest inspecting the starter gears - it's unlikely to be two faulty starters so maybe there is an issue with the starter gears when the bike is hot causing excessive drag. There was a mod on a limited number of early bikes to replace these because of this issue...

Dave
 
I'll let the dealer know that you mentioned a mod. My vin is like 0004 so I'd suspect it was an early bike.

The dealer so far has fixed every thing under warrentee. As of now though, it is out of warrentee since the starter change out. I'm hoping that since this is an ongoing problem based on me bring it to them prior they will keep trying to fix it. If not, I did purchase an extended warrentee so hopefully that will work if needed.

The bike was in the shop for 3 months for the head and now this issue. Will it ever end? <G>
 
Mine seems to be doing the same thing now.

I just got it back after the fuel pump was replaced.

It will not start on the button when hot.

It will kickstart fine but the starter labors and will not start when hot. I pull out the kicker and it starts right up.

If I let it cool 15 minutes it starts fine on the button.

Any ideas?
 
My 2010 TXC would start way EZ with the starter or kicker. I find it odd that yours will not start with the kicker. What does it do? Check the valves ASAP.
 
It is not the starter or the head. It is the starter gears. There is a service bulletin coming from Husqvarna about this. I have had to replace the gears on 2 bikes already. Both were early build TE250s.
 
The first time around my dealer replaced the starter motor. This didn't fix the issue I had. After taking it back, they replaced the gear portion of the starter and so far all is good.

Doug
 
ScottyR;127816 said:
It is not the starter or the head. It is the starter gears. There is a service bulletin coming from Husqvarna about this. I have had to replace the gears on 2 bikes already. Both were early build TE250s.
Click to expand...

Did you figure out it was the gears before you got the bulletin...?
 
Yes. We pulled one apart and then coincidentally, my top tech went to a 3 day school put on by the Husq Factory the same week and it came up in discussion. In most cases, the starter is buggered up as well if the gears need to be replaced.
 
Too bad on this issue ... Where are this service bulletins published at?

My 08 TXC250 has 300+ hrs .... same battery, same starter .... Zero issues to date in this department ... Engine starts in < 2 secs on the starter or 1-2 kicks 98% of the time ....
 
raisrx251;127863 said:
Are you running the turn tech 2.5 battery? Try putting the stock one in and see if that fixes it too.
Click to expand...

Turntech 5.0. 13.5v at rest 14.25 with engine running.

Will crank all day when the motor is cold. Won't do 1 sec when hot.

Kickstarter works fine when hot. Auto-D and valves are fine.
 
ScottyR;127924 said:
Yes. We pulled one apart and then coincidentally, my top tech went to a 3 day school put on by the Husq Factory the same week and it came up in discussion. In most cases, the starter is buggered up as well if the gears need to be replaced.
Click to expand...

Is there a TSB out now?
 
You must log in or register to reply here.
Back
Top