125-200cc 06 125, premix ratio and oil capacity?

[txmxer]

Need some quick help, I dont have a manual and the link for the pdf manual here seems to be dead. Im running 40:1 maxima right now like I do with my other 2 strokes. I always run non synthetic maxima 10w40 in my bikes. I guess huskys dont have the number stamped into the case so how many ml for an 06 cr 125? lastly what is the stock plug so I can make sure thats whats in the bike?

Thanks in advance! I know they're simple questions but man I hate not having a manual

 

[MattR]

You can find most of your answers here.
http://www.cafehusky.com/threads/2-stroke-thread-index.23293/

There are links to manuals, spark plug chart, and premix tables. I don't recall if the oil specs are in the index thread, but the 125 bikes take 800 mL if I recall correctly.

 

[txmxer]

Thanks, I shouldve checked there first!

 

[txmxer]

I keep seeing different posts about oil capacity, from 650ml to 700 to 800 ml. How much oil are you guys using?

 

[R_Little]

40/1 for Maxima is fine.

there is a level screw on the right side of the motor behind the water pump and in front of the clutch cover.

you will see it screws into nothing.

pull it out and fill until the oil starts coming out of the hole...about 750mm goes in.

 

[txmxer]

Awesome thank you! Ill put in 750 ml, I dont usually like going by the check bolt.

 

[Kyle Tarry]

Awesome thank you! Ill put in 750 ml, I dont usually like going by the check bolt.

The check bolt is what you should go by. The factory put it there for a reason.

Same reason you fill your car and check on the dipstick...

 

[Eaglefreek]

The check bolt is what you should go by. The factory put it there for a reason.

Same reason you fill your car and check on the dipstick...

Exactamundo. You can over or under fill if you don't check the level with the screw.