ZipTy Shark Fins - THE Factory Choice!

Discussion in 'Zip Ty Racing' started by Huskynoobee, Jun 6, 2016.

  1. Huskynoobee CH Sponsor ZipTy Racing

    Location:
    Castaic, CA
    Husqvarna Motorcycle:
    2011 TE449 2006 WR250
    Other Motorcycles:
    HDUltra Classic IT200 YZ250 SV650s
    No, trust me, I'd be pimping them here to make sure they were all sold if that was the case!
    Johnrg likes this.
  2. Johnrg Husqvarna
    Pro Class

    Location:
    Santa Barbara
    Husqvarna Motorcycle:
    2013 TE 310 R
    Other Motorcycles:
    Ducati Sport Classic / Ducati Multi.
    May be worth investigating if the new SWM models coming in have the same setup as the 310/449/etc... A ZipTy logo is always good advertising. I'm sure there are enough buyers for a run. Owners probably keeping their Italians at this point.
    Huskynoobee likes this.
  3. Huskynoobee CH Sponsor ZipTy Racing

    Location:
    Castaic, CA
    Husqvarna Motorcycle:
    2011 TE449 2006 WR250
    Other Motorcycles:
    HDUltra Classic IT200 YZ250 SV650s
    Turns out I was wrong, we still have a few left in stock. PM me and I'll get you the details.
  4. in-trim Husqvarna
    C Class

    Location:
    Eureka, CA
    Husqvarna Motorcycle:
    '08 TE450
    Other Motorcycles:
    '03 KTM 640A & others
    Just wondering,,, how many guaranteed orders would be needed to get a run done for spaghetti huskies? I've recently picked up an '08 TE450 and would dig a ZipTy shark fin.
  5. Huskynoobee CH Sponsor ZipTy Racing

    Location:
    Castaic, CA
    Husqvarna Motorcycle:
    2011 TE449 2006 WR250
    Other Motorcycles:
    HDUltra Classic IT200 YZ250 SV650s
    I'll check into it when I'm back in town.