You read that right. ZipTy is happy to announce that we are launching ZipTy Racing Monthly Specials. Be sure to come back often to check out the latest deals on ZipTy Racing Products. These are EXCLUSIVE TO CAFE HUSKY MEMBERS ONLY! You won't find these deals anywhere else. This is our way of saying Thank You for your continued support and patronage. On October 1, 2016, we will get this thing going by offering not one, but TWO specials to kick this thing off!
The first October ZipTy Special is the Husky Brake Pedal stop. Fits 02-13 Husqvarna 250-449/511 TE/TC/TXC/SMR models . Our first generation brake pedal stop. This provides a more solid stopper for the brake pedal where the stock one tends to bend the bolt. Regularly $19.99 now on sale for just $14.99. But wait, there's more! We'll throw one in for FREE for all orders over $100 not including shipping. Use code MSOCT2 October 1-31, 2016.
OK, enough waiting. Here's the next ZipTy Racing October Monthly Special! The ZipTy Racing Reservoir RAM Mount Introducing ZipTy's latest product, The ZipTy Reservoir Ram Mount. These allow you to add mirrors or accessories to your motorcycle without using up precious handlebar space. Non dual sport bikes can add ram mount accessories such as GPS's in a convenient location. This product works on Husky and KTM bikes with Brembo brake and clutch master cylinders. May also fit other Brembo equipped bikes. Pat Pending Regularly $39.99 but during October you can get these babies for 50% OFF! Just use code MSOCT1 October 1-31, 2016
Huskynoobee On the above foto with the brake stop, can you check if the race shop has a brake pushrod and "heim" joint assembly laying around in old race spares? (just to the left (aft) of the yellow arrow/ brake stop piece) If so I need one and will take a brake stop too (my card is on file). Working on my ex-TXC450** and broke the adjuster/threaded portion of the "ball" joint into the master cylinder pushrod, it was corroded in place. Plus the OEM stop is crapped out too. I had the ZTR brake stop one on this bike but transferred it to my newer red huskys and sold it with the bike. PS for those that don't know, as the red anodizing fades, a red permanent marker sharpie works great to restore the original red look. **Installed a new ZipTy Racing Clutch slave cylinder with 7602 Slave piston to bullet proof the clutch system, which failed during our SWM test ride (SWM 500, 300 and Husky TXC450).
Hey Huskynoobee- will these fit your 449? (if so, then they'll fit my bike... but they look slightly different)
Yes, the 310 masters are the same part# IIRC. The Brembo bolt pattern for the cover is darn near universal across most of their applications. That's why Ty went ahead with this design. I've seen them on Husky, KTM, Bergs, etc.
So are both pictured included or if not how do we specify color selection on your site before completing checkout? Confusion is the only thing holding me back from a purchase. thanks
I'd hold off and call. I'm planning to give 'em a call for the same thing (...and discuss the $11 shipping charge; don't forget calif tax either. lotsa places down in socal are at 9%) or add a note or email them what you want.
Sorry guys, forgot to respond to this. It's probably best to call the shop and check if the color of your choice is available for the Ram mount covers. If I remember correctly, there were more blue covers in the warehouse. I haven't been able to go to the shop in a couple of weeks due to demands at work and other commitments.
Tyler- Did you ever get an answer? I've called the shop to ask about shipping & tax, but keep getting the v-mail. I'll try again tomorrow.
Hey, I finally got through (using the 2nd number- Mike in the back handled it) and I pulled the trigger. Came to $31 & some change after all was said and done. Mike said they had plenty of both black and blue caps. thanks Huskynoobee for coordinating this.
it'll probably be monday or tuesday till it gets here. I am NOT expecting it to have a RAM ball included (I'm using it for a small auxillay LED light).
The ram balls are usually in stock though if you want to include one with your order along with double take mirrors.
I won a set of touratech adventure mirrors which would thread into the cover without a ball, that's why I was asking. Thanks folks
yep, no RAM ball. very nicely made- the black seems powder-coated, not anodized. I'm *guessing* the threads are M10, which is fairly standard IIRC.
