1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

I dun screwed up

Discussion in 'Vintage Restoration Projects' started by Caden, Aug 22, 2016.

  1. Caden Husqvarna
    C Class

    Husqvarna Motorcycle:
    1983 husquavarna 125xc
    Other Motorcycles:
    1983 Honda cx650c
    Can someone point me in the direction of a gasket for my 1983 250 cr. It's the gasket for the left side of the transmission. I tried to make it. But I failed. You guys are abundant and resourceful any help will be appreciated.
    Caden, Aug 22, 2016
    #1

  2. ruwfo Administrator

    Location:
    NJ
    Husqvarna Motorcycle:
    1980 390CR, 1982 430CR, 1984 400WR
    Other Motorcycles:
    1985 250XC, 2016 FJ-09
    Here's a link to some part sources

    http://www.cafehusky.com/threads/vintage-husqvarna-1970-1980-parts-sources.8/


    　

    　
    Husqvarna-Parts Arizona

    Contact: Phillip
    Location: Arizona,USA

    Webaddress/link : http://www.husqvarna-parts.com/page/page/3737813.htm



    Halls-Cycle's Springfield, Illinois

    http://www.halls-cycles.com/


    Or in a pinch just use high grade gasket maker compound , I had my off so much a few years ago I would have went through
    1/2 dozen gaskets...

    https://www.permatex.com/product-category/gasketing/gasket-makers/
    ruwfo, Aug 23, 2016
    #2

  3. justintendo klotz super techniplate junkie

    Location:
    mercer, pa/northwest pa
    Husqvarna Motorcycle:
    84 250,86 400,87 430,88 250,95 360
    Other Motorcycles:
    99 kawasaki zrx 1100
    use grease on one side of gasket, and seal the other side to the clutch cover. then it will be reusable.
    justintendo, Aug 23, 2016
    #3
    oldbikedude likes this.

  4. grouty Auto Lover ...

    Location:
    South West UK
    Husqvarna Motorcycle:
    78 390WR, 78 390 AMX, 500 Humph
    Other Motorcycles:
    works 73 CCM 520, another 73 CCM520
    Yep, I use golden hermetite on the cover, and just grease the other. I get several "uses" out of a gasket (not that I'm tight ;))
    grouty, Aug 23, 2016
    #4

  5. justintendo klotz super techniplate junkie

    Location:
    mercer, pa/northwest pa
    Husqvarna Motorcycle:
    84 250,86 400,87 430,88 250,95 360
    Other Motorcycles:
    99 kawasaki zrx 1100
    nothing tight about it, just no sense in ruining gaskets for no reason
    justintendo, Aug 23, 2016
    #5

  6. Caden Husqvarna
    C Class

    Husqvarna Motorcycle:
    1983 husquavarna 125xc
    Other Motorcycles:
    1983 Honda cx650c
    Thanks guys it was the really old gasket though and need to be replaced I called halls and it's on the way to my house thank you
    Caden, Aug 24, 2016
    #6