2011 triple assembly for TXC250 on TE310?

I need to find that part# for the fuel pump.

Why do you think the starter will be an issue @Trenchcoat85?

The bottom triple clamp was bent, btw.

The starter will be harder to source and is relatively expensive (it seems to be an xlite-only starter motor); but the fuel pump is made by the millions (even though it's a 30mm rather than a 38mm dia pump- which is made by the tens-of-millions). Also make sure you need a fuel pump if you're going for the high-end item; or else just buy the cheapie off ebay to experiment with (here you go... $13.46 delivered: https://www.ebay.com/itm/Fuel-Pump-...-KTM-Husaberg-Motorcycle-Scooter/163257471275)


starter: make sure your ring gear (and worm) are good- it doesn't take too much galling to stall the starter. Husky hardened the gear set for the 2013-2014 models.

seems like someone found a new starter a couple months ago; also this firm has rebuilt starters:


good luck & keep us posted

oh yeah....

the stock fuel pump part number is: 8000 H3424 and retails for:
>
>
>
>
>
$484 with Motosports discount ($600+ MSRP)

https://www.motosport.com/oem-parts/part-number/8000h3424

but I believe it includes everything (flange-to-flange: pump, prefilter, filter, 4 internal hoses, pressure regulator). here's the exact same thing for a KTM (items 3 & 4):



here it is on the bench:

Alrighty, Ricks looks like they’re unavailable for Huskys at the moment but I’ll start looking around.
Thanks @Trenchcoat85

my fuel pump replacement... http://www.cafehusky.com/threads/fuel-pump-replacement-11-te310.89880/