1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

250-500cc 2010 Wr 300

Discussion in '2 Stroke' started by Chisler, Feb 3, 2020.

  1. ct cr430 Husqvarna
    AA Class

    Location:
    Connecticut , litchfield county
    Husqvarna Motorcycle:
    1981 cr 430
    Other Motorcycles:
    2007 honda crf450
    Spectro sells a 10w30 clutch saver oil
    Chisler likes this.
  2. Chisler Husqvarna
    A Class

    Location:
    British Columbia, Chilliwack River Valley
    Husqvarna Motorcycle:
    2010 WR 300 Husqvarna
    Found this ..... I’ll have to check around to see if anyone has it

    Attached Files:

  3. Chisler Husqvarna
    A Class

    Location:
    British Columbia, Chilliwack River Valley
    Husqvarna Motorcycle:
    2010 WR 300 Husqvarna
    Oops meant this .... 7FB33A40-047B-4819-A5AB-B2A5CD9C96DE.png
    Dirtdame likes this.
  4. Chisler Husqvarna
    A Class

    Location:
    British Columbia, Chilliwack River Valley
    Husqvarna Motorcycle:
    2010 WR 300 Husqvarna
    Well fun morning looking fer oil ... Lol .. couldn’t find any Clutch saver oil ... but I found this and low and behold ... so far
    the clutch drag has diminished to almost nothing .... a quick test ride brought good results .... I’ll have to ride it a bit more and post up the results .... Rekluse

    Attached Files:

    Dirtdame likes this.
  5. Chisler Husqvarna
    A Class

    Location:
    British Columbia, Chilliwack River Valley
    Husqvarna Motorcycle:
    2010 WR 300 Husqvarna
  6. Dirtdame Administrator

    Location:
    Escondido, California
    Husqvarna Motorcycle:
    07 TE450,11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    KDX200,Hodaka100,MV Agusta Brutale
    I'd be willing to give that a try, if it really gets rid of the drag. That's the biggest complaint I have with my 300. In really slow going, the bike will manage to stall with the clutch pulled in, often leaving me in a really awkward position and unable to get a foot to the ground, or kickstart the bike without moving it first.
    Chisler likes this.
  7. robertaccio Contributing Member

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2017 TX300
    Other Motorcycles:
    92BetaZero260, 01YamahaYZ125
    oil thread......not saying anything just that I use Maxima MTL 75w (extra lite) its a little like water, so I just change it often. And of course have that clutch baselined and in perfect blue printed order ie: all discs flat and in good order, basket in good order, along with arm, bearings and pusher shaft.
    Chisler likes this.
  8. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    93 360, 87 CR250, 82 87 88 430
    Other Motorcycles:
    Sherco 300

    my lubricants are buried or I would get what I used posted
    but this is what I had in mind,, a high quality synthetic lube that supports clutch use
    I slide mine in really technical stuff and have no issues with creep or slip
    glad to see it worked, it only gets better when all the plates surfaces are bathed in it for a full oil change cycle, as to clean out contaminants
    Chisler likes this.
  9. Chisler Husqvarna
    A Class

    Location:
    British Columbia, Chilliwack River Valley
    Husqvarna Motorcycle:
    2010 WR 300 Husqvarna
    Well I had two seats and took one to play around with ... the local upholstery place was able to shave it and retain the original cover ... I’ll give it a try ... here’s some pics with the stocker ... then the shaved 6772A513-CA2B-4D4A-A39C-B09F997F622F.png
  10. Chisler Husqvarna
    A Class

    Location:
    British Columbia, Chilliwack River Valley
    Husqvarna Motorcycle:
    2010 WR 300 Husqvarna
  11. Chisler Husqvarna
    A Class

    Location:
    British Columbia, Chilliwack River Valley
    Husqvarna Motorcycle:
    2010 WR 300 Husqvarna
    Oops shaved ... then the stocker
  12. Huskynoobee CH Sponsor ZipTy Racing

    Location:
    Castaic, CA
    Husqvarna Motorcycle:
    2011 TE449 2006 WR250
    Other Motorcycles:
    HDUltra Classic IT200 YZ250 SV650s
  13. Chisler Husqvarna
    A Class

    Location:
    British Columbia, Chilliwack River Valley
    Husqvarna Motorcycle:
    2010 WR 300 Husqvarna
    One thing I’ve found is that it’s fairly easy to loose your breather tube and fitting on the top of engine case .... the part number for the fitting is ... HQ800019620 its a plastic 90 degree fitting with barbs and can go missing ... like what happened to me .... so when I replaced this take an extra tie wrap .. zap strap or whatever you call them and strap it to one of the breather hoses off the carb ... so ya don’t loose it if the fitting/hose ever decides to vacate your bike ... : ) 4CA78D65-4716-4FF6-BF5E-87EDACD70F48.png
    Goose719 and Huskynoobee like this.
  14. Chisler Husqvarna
    A Class

    Location:
    British Columbia, Chilliwack River Valley
    Husqvarna Motorcycle:
    2010 WR 300 Husqvarna
    : ) 32B4701F-EC76-4F73-85A6-7D4AC11B50BC.jpeg
    Huskynoobee likes this.
  15. Chisler Husqvarna
    A Class

    Location:
    British Columbia, Chilliwack River Valley
    Husqvarna Motorcycle:
    2010 WR 300 Husqvarna
  16. Dirtdame Administrator

    Location:
    Escondido, California
    Husqvarna Motorcycle:
    07 TE450,11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    KDX200,Hodaka100,MV Agusta Brutale
    So.....have you had a chance to put any more riding time on your bike to see how that transmission oil works?
  17. Chisler Husqvarna
    A Class

    Location:
    British Columbia, Chilliwack River Valley
    Husqvarna Motorcycle:
    2010 WR 300 Husqvarna
    No .... I’m gonna take it out this coming weekend ... I’ll be sure to let you know how things work out .... I’m remaining fairly optimistic that things are going to work good ... she’s ready to ride .... : )
    Huskynoobee and Dirtdame like this.
  18. Chisler Husqvarna
    A Class

    Location:
    British Columbia, Chilliwack River Valley
    Husqvarna Motorcycle:
    2010 WR 300 Husqvarna
    Well lots of riding this weekend and the bike still has some clutch drag ... but not as bad ... shifts are smooth ... so I’m gonna look into something else ... the bike does idle in gear now ... never did before , I’ll do a few more rides and see if things loosen up ... good turn out up the Chilliwack River Valley .... couldn’t think of a better thing to do with this social distancing thing .... young and old were out .... it was a good time ... my buddy did mention a few things to try with the clutch plates ( drilling holes ) to allow the oil to disperse away from the plates ... when I get time maybe I’ll give this try ... but all in all I like this Rekluse oil .... but not the price .... Lol
    Dirtdame likes this.
  19. Chisler Husqvarna
    A Class

    Location:
    British Columbia, Chilliwack River Valley
    Husqvarna Motorcycle:
    2010 WR 300 Husqvarna
    Forgot to mention ... the larger rear disc works awesome ... I highly recommend that upgrade
    Huskynoobee likes this.
  20. Chisler Husqvarna
    A Class

    Location:
    British Columbia, Chilliwack River Valley
    Husqvarna Motorcycle:
    2010 WR 300 Husqvarna
    Project today .... packin the Silencer ... : ) DDA71F1C-DDAB-479C-9C71-B1801E0A9DD6.jpeg