1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

125-200cc 09 cr/wr 125

Discussion in '2 Stroke' started by surfer1100, Jan 19, 2009.

  1. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    Do your 09 WR125's have the spark arrestor stock? I was told the CR and WR had the same none sparky muffler. :excuseme:
  2. surfer1100 Husqvarna
    AA Class

    Location:
    Ottawa, CAN
    Husqvarna Motorcycle:
    09 WR250, Memories of past tiddlers.
    Other Motorcycles:
    TM-01 EN 125, 03 125 MX, 09 EN 155
    Nope they don't...I am starting to think the replacement exhaust system will have a sparky though.
  3. HuskyDude Moderator

    Location:
    BC, Canada
    Husqvarna Motorcycle:
    13/TR650
    Other Motorcycles:
    10/EC300, 76/TY175
  4. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
  5. ScottyR Husqvarna
    AA Class

    Location:
    Mitchell, ON
    I was told by a good source that Husq NA has approached FMF to build a sparky for the 09 WRs.
  6. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    Why would it not come with it. WR's always have
  7. ScottyR Husqvarna
    AA Class

    Location:
    Mitchell, ON
    I bet it has to do with the EPA/US DOT. To be legally imported into the US as competition vehicles, the DOT gives the importer a list of criteria that the bike must meet and 1 of those criteria is no sparky. This is the reason why most of the new KTMs/Bergs/GasGas' do not come with sparkys either.

    Because Cagiva was so small they took a few liberties with their paperwork. Now that BMWs name is on the paperwork, every i must be dotted and t crossed to the letter of the law.
  8. Norman Foley Husqvarna
    Pro Class

    Location:
    Trumansburg, NY... The Beautiful, Finger Lakes
    Husqvarna Motorcycle:
    82 250WR 86 250WR 93 WXE350 03 TE610
    Other Motorcycles:
    '85 Fantic 300 '12 HUSABERG TE250
    Don't the WR250 and 300 still have sparkys?
  9. krieg Husqvarna
    Pro Class

    Location:
    Matthews, NC
    Husqvarna Motorcycle:
    Many in the past
    Other Motorcycles:
    '12 Triumph Scrambler
    I looked at my 300 tonight and the writing on the side makes no mention of a US-Approved spark arrestor.
  10. Norman Foley Husqvarna
    Pro Class

    Location:
    Trumansburg, NY... The Beautiful, Finger Lakes
    Husqvarna Motorcycle:
    82 250WR 86 250WR 93 WXE350 03 TE610
    Other Motorcycles:
    '85 Fantic 300 '12 HUSABERG TE250
    I just got back from a marathon trip to South Jersey facilities of P3. Lindsey and Eric Pirie are great people with a very nice product.:thumbsup:

    The are going to start mocking up the skid plate with improved protection for the water pump and ignition cover. Waiting on the pipe guard until new pipe is availible, as we don't know how different it will be. I'll post about big tank on other thread.
  11. Norman Foley Husqvarna
    Pro Class

    Location:
    Trumansburg, NY... The Beautiful, Finger Lakes
    Husqvarna Motorcycle:
    82 250WR 86 250WR 93 WXE350 03 TE610
    Other Motorcycles:
    '85 Fantic 300 '12 HUSABERG TE250
    I got my Motosportz rear disc guard today!:thumbsup: Too bad my bike is 300 miles away.:cry:
  12. HuskyMax Husqvarna
    AA Class

    Location:
    WV
    No, but I did get a good look at it. You are talking about the bucket they used to cover the filter right?