• Husqvarna Motorcycles Made In Sweden - About 1988 and older

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Yes...sometimes cylinder heads DO break...

Richard Colahan

Husqvarna
AA Class
A few days ago our friend "Visiteur" posted a neat photo of a stack of boxed-up NOS Husky cylinder heads sitting in a warehouse.
It was followed by the observation: "Trouble is, when have you ever worn out a 2 stroke cylinder head?"
Well...I can't say that I've ever worn one out...but I sure have broken one.
The attached photos are of my 1974 125WR taken after the 1979 Corduroy Enduro, the 350 mile 2 day Canadian Championship.
I toppled over on my right hand side on a muddy skid road, and the side of the bike landed squarely on a fresh cut 20" diameter tree stump.
I picked up the bike and looked to see not only the dented tank...but the whole rh side of the cylinder head snapped clean off.
It looked like the break went all the way back to the combustion chamber, but when I kicked it over it fired right up. So...nothing to do but put it in gear and ride away...half expecting it to blow out at any moment.
Which it didn't. I think I still had about 100 miles to go and the bike finished. When I got home I pulled the head and discovered the break was into the barrel-to-head seating band, with about 2mm of material left to seal.
BTW...I still race that bike, and that alloy tank still has that dent!
And if you're wondering where the Husky air filter is...
In 1979 I used a Yamaha DT-1 air box connected to the carb with a Yam AT-1 MX molded hose. The air box was surrounded by a vinyl shroud, breathing from under the seat. The Cord was notorious for numerous deep water crossings (still is...) and with that set-up this bike handled them all.IMG_0001.jpgIMG.jpg
 
wow, what a shot that stump had! cool story finishing the event. thats some hard core 125 action
 
Back
Top