• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc WTB 2002 Cr250 Front Rim

Not sure what the diameter of the axle has to do with the rim. As far as I know, providing you have the correct diameter (rim ie 21") , width and number of spoke holes ( to match your hub) it doesn't matter what rim you use.
 
Crocus Paper said:
Not sure what the diameter of the axle has to do with the rim. As far as I know, providing you have the correct diameter (rim ie 21") , width and number of spoke holes ( to match your hub) it doesn't matter what rim you use.
Click to expand...

Bought an 01 Wr250 front rim that was listed to fit my bike but ut didn't because I discovered the axles are different. So as a result the bearings were much smaller
 
here's a suggestion
look uo the front wheel bearing part number on a fiche and see what other years it fits
I put on 04 forks on my 99 and used that method to find the wheel I needed
 
RyanL said:
Bought an 01 Wr250 front rim that was listed to fit my bike but ut didn't because I discovered the axles are different. So as a result the bearings were much smaller
Click to expand...



Ok, I think you mean "wheel", this only makes sense if I put the word "wheel" where you are using the word "rim".
 
You must log in or register to reply here.
Back
Top