• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

250-500cc Wr250 dies when i give it throttle?

AlexHusky23

AlexHusky23

Husqvarna
C Class
I went on my bike last week and after 1 lap of the enduro the bike died and would not start. I replaced the plug, the bike started fine but after another lap it died again. Any ideas what it could be? Alex
 
What did your plug look like when you took it out?

Any changes to the bike (hardware)?

Did you change oil brand or ratio, Elevation, humidity, major temp change?

Does the plug have agood spark when clean?

crappy pump gas?

Air filter dirty/pluged?
 
^ this and was any gas coming out of the overflow tube? maybe a float stuck open? with more info we will be able to help you better.
 
AlexHusky23 said:
I went on my bike last week and after 1 lap of the enduro the bike died and would not start. I replaced the plug, the bike started fine but after another lap it died again. Any ideas what it could be? Alex
Click to expand...

carefully check the spark quality.ducati energia ignition [made in india]has had probs that cause poor starting & kick back when starting.mine so bad push starting down the biggest hill did not work.
 
was it wet?
my 360 had a similar issue it sucked in water through a split boot would be running fine and cough splutter to death 5 mins half a lap no lap.. worth a check if not.
if it was dry check privious posts all good
 
broken biker said:
carefully check the spark quality.ducati energia ignition [made in india]has had probs that cause poor starting & kick back when starting.mine so bad push starting down the biggest hill did not work.
Click to expand...

Dude, this thread is almost one year old. Where did you even dig this up from? I think either by now he has fixed the problem, or pushed the bike off a cliff... There's no need to reply to these super old threads.
 
Kyle Tarry said:
Dude, this thread is almost one year old. Where did you even dig this up from? I think either by now he has fixed the problem, or pushed the bike off a cliff... There's no need to reply to these super old threads.
Click to expand...
Unless its helpful to someone having a similar problem?
 
You must log in or register to reply here.
Back
Top