• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

wont start after top end rebuild HELP!!!

gavin pett

Husqvarna
hi all im need some advice i have a 125 sm 2006 i have replaced the piston small end piston rings and gaskets but now the bike wont start there is compression fuel and spark (altho difficult to see cause of the sun you can hear it tho) im now stuck any tips of advice would be very helpful
 
Fuel.... air.... spark....conduction path... all at the right time.... and boom. Are all of these in order? Step by step, ensure each is working properly. I hope you figure it out.
 
Back
Top