• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc will the 04 pipe fit on my 09?

T

troylee

Husqvarna
A Class
hi guys, i wondered if the pipe of a 04 will fit to my 2009 cr 125?
i read something like this..i think

and does anyboby know where to buy the upgraded powervalves in europe?

thanks,
martin
 
You are going to have to do some work on the pipe to make it fit. They are different frames. I did it but I had to cut off the rear mount and move it and re-weld it. The front mount is closer but you will have to use a spacer and do a little bending. You might have to bend the head pipe a little as the angle is a little off. Doable but I would just get a HGS as they are pretty easy to get there.
 
You must log in or register to reply here.
Back
Top