• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc white creamy substance in carby?

rockdancer

rockdancer

Husqvarna
Pro Class
Anyone had an experience with a light white creamy substance in and around the carby slide:confused:??
This happened on a mikuni carb but wasnt evident after swapping it with the keihin

Also wondering why the float level on a Keihin would drastically change its height/level
I had set the height a few months ago but removed the carb and refitted it and the level changed so much so that there was fuel pouring cosntantly out of the carb when it was on the stand
 
Yep, fuel/oil water mix. I get it all the time here in the NW with 100% humidity and COLD. The new Lectron carb does it even worse as it atomizes the fuel more and causes condensation. Runs perfect and does not affect anything so I just let it be.
 
yup. spit back, air filter oil, etc all mix with the aforementioned condensation caused by the cold conditions in the carb blah blah blah...

is fuel peeing out while on the side or center stand??? its normal in some cases to see some peeing or drops from the hoses while the gas is on and its leaned over on the side stand past a certain angle.
 
It's been very hot and humid
Thrush - yes I was waiting for a joke of some kind lol
PV - it was so far out it wouldn't run.
I think it must of happened when the carb was in the back of my car and got bumped around
Pulled the carb , adjusted it and it was fine
 
yikes!
white stuff and a dribbling carb?
time for some antibiotics!
that or the float-bowl fairys were messin' with that fuel level. little turds. they fry up real nice with a lil butter. oooo yeh they do.
 
You must log in or register to reply here.
Back
Top