• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

250-500cc Which year honda reed gaskets fit?

GARACERX

GARACERX

Husqvarna
A Class
I just got a 2011 WR300. I want to install reed cage/ boot gaskets. I heard that some year Honda CR
reed gaskets fit..true or not ?

Thanks all !!
 
If you take the numbers off your reed cage you can cross reference them to be sure at a honda dealer.

My # didn't exactly match the honda cr 125's reed pedals, but they fit. Instead of AG602H it was 3P602H.

Edit: Oops somehow missed you're talking about a gasket
 
GARACERX said:
I just got a 2011 WR300. I want to install reed cage/ boot gaskets. I heard that some year Honda CR
reed gaskets fit..true or not ?

Thanks all !!
Click to expand...
curious why you ask this?? i have been told that some of these WRs have had issues with factory gaskets failing causing vacuum leaks or other issues. I noticed my boot is cracking pretty badly and when i inquired about replacing it someone told me to use the cr 250 gaskets and put one on both sides (one on the cylinder itself and one between the boot and the reeds??
 
Yes, I just got this very low hour 11 WR 300. On first ride , even with a pwk carb, jetted close to database
average- it was lean. It does act like an air leak..removed reed cage. Found only 1 thin gasket on cylinder side.
Folks on the cafe have reccomended gaskets on both sides of reed block , so I have some on the way....
 
  • Like
Reactions: JDJ
Just did this to my 2014 Italian WR300. Put a 92-01 Honda CR250 gasket on reed block between carburetor boot. Husky gives you one between reed block and cylinder. Read there was writing etched on reed block that caused air leak. Writing on mine (same as 2013) was just on inside edge of O-ring seal recessed in the carburetor boot.
 
You must log in or register to reply here.
Back
Top