250-500cc Whats Wr 360 bottom end wort?

[juicypips]

Well no clutch whats the bottom end worth 6 spd unknown bearings unknown.. 2003engine uk gbp what should i part with?

 

[justintendo]

i would say it would be worth more split, then you can advertise the cases or the trans for what they are!
are you looking for a nice lined cylinder by any chance?

 

[juicypips]

Nah was gunna be cheeky an slam my spare piston an barrel on it sell it on.

 

[justintendo]

i see, i would keep the bottom end. your call tho its hard to put a price on a used motor

 

[juicypips]

I rebuilt my bottom end 15hours ago full bearings conrod the works.
Oh and kickstart spring, should be good skf throughout apart from the one bearing INA 72..? Something, still high quality parts, so if i get the motor it will be funding me fuel and oil addiction.

 

[justintendo]

should be good for for quite awhile! im just pack-ratty...

 

[wallybean]

I know Pack Ratty! My darling wife is always wondering what I am going to do with all the bins of spare parts for God knows what Husky! Why don't you have a garage sale honey?

 

[Chef]

Can you ever have enough parts? It's just after you sell those parts that something goes snap or boom.

 

[juicypips]

True but i cant keep hoarding will need to get rid of missus to make room.

 

[2premo]

been pack ratty for years
have full spares for every bike i own
80's NOS plastic, pistons and necessary hard parts through the 99 i have
seems excessive all the tubs and bins but my wife is fine with it

 

[2premo]

True but i cant keep hoarding will need to get rid of missus to make room.

you say that like its a bad thing

 

[juicypips]

I am very fond of my good lady, seems the bottom end and an original expansion is worth £190 i pick it up dayafter next

 

[bimmerboy86]

I need the left crank case if you decide to part.

 

[juicypips]

Very tempted to part it, where are you uk?

 

[juicypips]

Right got engine cases are good, cylinder studs are missing threads good tho clutch side covers good theres a few teeth missing from primary drive and one tooth from the clutch basket, baskets mashed! Will be used to send to talon too see if they have a match. Need to wait till i can find my flywheel puller and 27mm to get primary gear off to split the cases further.

Will be parting it any interest?? I will be as honest as i always am wich means if its junk you aint getting it! And post all pictures you require etc...

 

[juicypips]

Small scratch from shifter inbetween the u and s on the cover. No cracks just the usual small dents

 

[rancher1]

Right got engine cases are good, cylinder studs are missing threads good tho clutch side covers good theres a few teeth missing from primary drive and one tooth from the clutch basket, baskets mashed! Will be used to send to talon too see if they have a match. Need to wait till i can find my flywheel puller and 27mm to get primary gear off to split the cases further.

Will be parting it any interest?? I will be as honest as i always am wich means if its junk you aint getting it! And post all pictures you require etc...

If you are missing teeth from the clutch gear more than likely the main case behind it may be cracked. The hole for the kick start idler gear is also probably worn out as well.

 

[justintendo]

the kickstart idler did me in! i guess thats why the seller wouldnt let me kick the 360 when i bought mine. it was already skipping teeth when i went to buy it. its all fixed up for now but i didnt know better.

 

[juicypips]

The cases look fine will give it a finer look theres a nick in the case beneath waterpump housing but no evidence elsewhere.