• Husqvarna Motorcycles Made In Sweden - About 1988 and older

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Vintage Husqvarna Service Bulletins

HuskyT

HuskyT

Moderator
Staff member
This thread is for the clear posting of Vintage Husqvarna Service Bulletins Only.

The thread will be technical in nature

There is wealth of information in here. Start reading.... sift through to find what you may need.

If you have service bulletins from back in the day or have them on PDF please PM me and I'll send you my email address. If you only have paper copies we can handle that via mail.

The clearer the documents the better!


T
 
First Section General information

0 - general info

0-General_info.pdf

38 pages

Ignition Timing charts
Start levers on autos
78/79 Ohlins shcok frame mods
Torque value SEm Magnetos
420 Auto clutch springs
Shock settings 1983 wr, cr , xc
four stroke air filter oil
Service school Maintenance tips!
1980 390 auto
ISDE 6 day Tech tips!
Misc 4 stroke tips
1984 WR 125
4 stroke starting procedure
1984 WR400 Tech Data
1977 and on Steering stem bearing, frotn fork and fork oil tips
420 auot kickstarter freewheel
1980 390 conversion to 420 ( impressive information - 6 detail pages)
1980 390 Auto info
 
3-engine PDF

3-engine PDF must view with Adobe Reader

3-engine.pdf

28 pages

Bing Carb
360 piston clearance
Fuel hose 360 with amal carb
Torque Value Motoplat 139
Torque value cylinder head nuts
Auto oil
Carb 125 cr, 250 wr, 360 auto
crank needle bearings 390 amx/360
Piston circlips
Gearshaft on motors # 2059
Bing Carbs
Carb needle jets 1979 240/250 modification required
Carb cover for cold weather to 5 degrees celsius
Clutch on autos
crankcase mod 240/250/390 motors # 2061 thru 2072
Clutch push rod mod 1980 240/250/390
Crankshaft Balance 420 AXC / AE
Clutch shoe 420 autos
Cylinder stud replacement 1981 240/250
Engine flange bushing 430
Piston /cylinder seizure mods 82 430 CR WR
Head Gasket 400 wr
 
7-12 electrical pdf service bulletins

7-12 CARB PDF SERVICE BULLETINS Must view with Adobe reader

7-12_carb.pdf

4 PAGES

1985 All XC CR airbox Upgrade on Rivets

1985 XC CR 250 Jetting

1985 Four Stroke Float Sizes

Avaialability of 1983 to 1985 Service manuals ( from back in the day)
 
9-Tools PDF Service Bulletins

9-Tools PDF Service Bulletins View with Adobe reader

9-tools.pdf

11 PAGES

240 250 AND 390 CYLINDER HEAD STUD SIZES

Various tools pullers holders including specific references for Automatics

Flywheel Puller Vs. Ignition cross reference
 
4-Trans PDF

4-Trans PDF View with Adobe Reader

4-trans.pdf

12 pages

1978 clutch springs

1980 clutch pushrods (wrong pushrod from factory)

Gear Box 240 250 390

1982 Clutch ring

1982 Mounting of Clutch Hub

Clutch Gear Kickstart gear Support Gear 240 250 430 500

1983 125 clutch pushrods ( wrong push rod from factory)

New Clutch 1984 250
 
8-001 Thru 8-149 Husqvarna Service Bulletins

The following link contains a huge amount of information 8-001 thru 8-149 ... this was effective as of and up to March 1984 Includes a lot of detailed information on Porting 125's, 250's, 390's and 430's.

8-001 thru 8-149 Service bulletins
210 pages

Courtesy of Picklito! :thumbsup::cheers::applause:

T
 
You must log in or register to reply here.
Back
Top