• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Trail Tech Stuff

Huskynoobee

Huskynoobee

CH Sponsor ZipTy Racing
Staff member
Thought I'd start a fresh thread for this subject as I'm sure it will expand. I want to put a Vapor on my 06 WR 250. I've used the part finder on the TT site, but have a couple of questions.
1. Is the 752-102 the best option or is there one that includes the optional temp sensor that doesn't require a hose cut? Which is more accurate in terms of coolant temp?
2. I'm not running lights and as a result not using the voltage regulator. Will I need to install it in order to run the unit/prevent damage?

Thanks!
 
Huskynoobee said:
Thought I'd start a fresh thread for this subject as I'm sure it will expand. I want to put a Vapor on my 06 WR 250. I've used the part finder on the TT site, but have a couple of questions.
1. Is the 752-102 the best option or is there one that includes the optional temp sensor that doesn't require a hose cut? Which is more accurate in terms of coolant temp?
2. I'm not running lights and as a result not using the voltage regulator. Will I need to install it in order to run the unit/prevent damage?

Thanks!
Click to expand...


The fin sensor works fine and no need to cut the line.

input - 9.0-400 VAC/VDC (No polarity requirements.) call and ask but seems it should work fine.
 
You must log in or register to reply here.
Back
Top