• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

TE610 Hubs

WS6ick

WS6ick

Husqvarna
Hello. This is my first post. I have been lurking on this site for sometime and have gotten tons of useful information, but I finally have a problem I can't find an answer to.
I recently purchased a 99 te610(left side kickstart). It was converted to be street legal so I have been doing a lot of street riding on it. I am wanting to get some 17 inch supermoto rims to put on it. I have been looking around and can't seem to find any. So basically I have 2 questions. First, will the hubs off a 2000+ te/sm610 fit a 99? And secondly have any of you used the aftermarket hubs(warp9 or excel) that fit a 99?
Thanks in advance for any help!
 
WS6ick said:
Hello. This is my first post. I have been lurking on this site for sometime and have gotten tons of useful information, but I finally have a problem I can't find an answer to.
I recently purchased a 99 te610(left side kickstart). It was converted to be street legal so I have been doing a lot of street riding on it. I am wanting to get some 17 inch supermoto rims to put on it. I have been looking around and can't seem to find any. So basically I have 2 questions. First, will the hubs off a 2000+ te/sm610 fit a 99? And secondly have any of you used the aftermarket hubs(warp9 or excel) that fit a 99?
Thanks in advance for any help!
Click to expand...


In general the '99 and '00 2 stroke wheels were the same except the earlier wheels used spacers for the thinner axle.

if you have 4 bolts on the rear disk that should be a good indication it will work.

The 2nd thing to check is the sprocket mount thickness as the newer 4 stokes have a wider flange. You may need a 2 stroke wheel on the old 610.
 
You must log in or register to reply here.
Back
Top