• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Te 630 (2011) Obd Bluetooth

H

HorAnd

Husqvarna
Hi all,

Has anyone tried to connect to ECU with a bluetooth OBD adaptor and app Torque?
They don't see each other (BT OBD adaptor works fine with my car).
Is there any trick or ECU is only communicating with iBeat software.
The only option I need is to read fault codes.

I have the 6 pin OBD2 adaptor with this pinout:


Thanks for the help!
 
kirbybikes said:
I have not heard of anyone being able to make this type of connection work. I have only have only seen and used the hardwire version. See this thread http://www.cafehusky.com/threads/the-ibeat-thread.44621/ for all the information you will need. Ibeat is the only way to communicate with the ECU.
Click to expand...

Thank you for the info, than I give up trying.
I have a mini VCI J2534 OBD2 USB cable, originally made for Toyota.
Do you know if it would work with iBeat or need special cable (I saw in a post someone used J1850) to connect?
I need to install virtual machine to have 32bit Windows and I don't want to waste time if it would not work with the cable I have.

Thank you.
 
I am no expert on Ibeat. I am an original owner from 2011 and only got my Ibeat set up running last fall. I went with the Lonelec cables that are linked in the thread, mainly because it was cheap and easy. I used an old Asus net book I had around to run the Ibeat. People have used a 32 bit Windows with virtual. Theoretically the bluetooth should work but not sure how easy it would be. Good luck with the project.
 
You must log in or register to reply here.
Back
Top