TE 310 License Plate Mount

[Mike-AK]

Does anyone know of a license plate mount for a 2012 TE 310 that does not look so "streety"? I want to retain the turn signals, but perhaps a lower profile blinker would be nice also. Can anyone provide alternatives to consider? Thanks in advance for any help you might provide.

 

[fasteer]

Take off all the dangly bits and you will be left with a short 'tail' just below the tail-light.
I siliconed and zip-tied a piece of kydex plastic to the tail.
The kydex piece is just bigger than the licence plate and keeps the plate from deforming due to gravel roost.
Zip-tie and silicone the licence plate to the kydex.
On the 310 the signal lights can be relocated just forward of where they are stock.
Perfect fit and costs nothing.
Wish I had a better photo, but this is the best I have (no longer own the 310)

 

[dalecarlsbad]

I used the OEM mount but trimmed it and moved the plate up. Replaced the plate light with an LED, and aftermarket blinkers. LED was a few bucks and super easy to install.

 

[Mike-AK]

I used the OEM mount but trimmed it and moved the plate up. Replaced the plate light with an LED, and aftermarket blinkers. LED was a few bucks and super easy to install.

Dale:

I like your idea. Thanks for posting the pictures. Are those aftermarket turn signals?

Mike

 

[dalecarlsbad]

Turn signals are from sicassracing.com $45 a pair.

 

[Mike-AK]

Thanks!

 

[Mike-AK]

I ended up going with the license plate and turn signal mounts from BMP. Thanks Bill!

 

[AllOut84]

I ended up going with the license plate and turn signal mounts from BMP. Thanks Bill!

View attachment 20303

Where can I find this plate kit online? Looks really nice. Thanks

 

[Mike-AK]

Where can I find this plate kit online? Looks really nice. Thanks

Bill's Motorcycles Plus (BMP) in Salem, OR. They are a sponsor. Give 'em a call. They are great folks.

 

[Rizzkid]

Just trimmed mine a bit, installed an LED bolt plate light and removed the spacer blocks on the turn signals so they do not stick out so far. Total cost $6.99 from PEP Boys for the chrome LED light.

 

[vintageveloce]

Just pull all the black plastic stuff off and mount it like this:

Note how nicely the turn signals are tucked in. I've crashed a bunch with no issues. In the top pic you can just see the tips of the front ones poking out past the forks.
Get them here:
http://sicassracing.com/store/products/turn_signals/led
C

 

[Mike-AK]

I changed my mind and decided to mount mine like this.

 

[blakeNY9]

Check out DRC Electrical Edge 2 LED tail light with universal holder from Wheeling Cycle Supply:

http://www.wheelingcyclesupply.com/shop/36/24/55.shtml

I also used these LED turn signals type 601:

http://www.wheelingcyclesupply.com/shop/36/24/63.shtml

I also have this new controller board on the way to integrate the turn signals into the tail light.

http://www.wheelingcyclesupply.com/shop/36/24/352.shtml

I attached some so-so pics. Really like the setup, very stealth and up out of the way.

-bh

 

[Mike-AK]

I used the OEM mount but trimmed it and moved the plate up. Replaced the plate light with an LED, and aftermarket blinkers. LED was a few bucks and super easy to install.

Dale:

Do you happen to have any detail pics of how the Sicass turn signals are mounted in the rear? I've got the signals, and am thinking about going with your setup again. Pics of how you have them mounted and the wiring detail would be really helpful if you have them.

Thanks,

Mike

 

[birdy]

I am using the moto cross mud guard and put on the integra from racetech (30° version). It has an integrated LED-Light for the number plate which can be easily put on and off without tools. Indicators can be installed as well (but I just have them in the front):

http://www.racetech.it/mascherine-portatarga/integra-portatarga-a-led/universal.html