• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

TE 250/310 screw rubs coolant line

I may have confused you ,its on the underside of the fuel tank most likely the fuel pump cover screws,next to the waterpump hose clamp when on the bike.
Husky you need to correct this at all the dealers / spoke to a raceteam member they have had same problem!
 
Just to add, if you go the Zip-Ty route, be sure to loctite your tank bolt. I also added small washers and 1 lock washer to allow the bolt to still have a solid surface to tighten onto. If you just tighten it with the HD washers and the original rubber washer, it tends to vibrate loose rather easily.
 
You must log in or register to reply here.
Back
Top