• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

All 2st Swing arm removal

Flynny

Flynny

Husqvarna
A Class
Trying to remove the main fulcrum pin that runs through the swing arm, engine case and frame but it will not budge.! It will turn (all be it slightly due to the flat on one end of the pin) but I cannot get it out. When I hit it with a hammer it sounds solid.

Am I missing something??
The bike is a 2004 wr 250

Thanks for any advise
 
All back together now with some good water proof grease in there. New front wheel bearings are fitted too, now trying to work out why the DRC led brake light doesn't work properly. All mot fails unfortunately. Can't seem to get my head round why the brake light will only light up the same brightness as the tail light, so when the lights are on you cannot tell that the brake light is on.
 
You must log in or register to reply here.
Back
Top