• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

250-500cc Suspension front and rear - WR 250 '00

kzfr

Husqvarna
Hi, i need ask you guys what is a original settings compression and rebound. My husky is WR 250 '00
Im newbie in enduro riding but i want a good settings thats why back to original settings.

Race Sag is 75mm - i know the correct is a 95-105 i want change it today.

Sorry for english!
 
Thanks Kyle! I was searching thats answer! Thanks again! I will read but my bike is old and im amateur/newbie in enduro.
I find a standard settings for front:
Comp - full open
Reb - 10 click out

And find in manual a preload and sag settings. But dont know yet how set click for "shock"
 
And find in manual a preload and sag settings.

Preload and sag are all in that thread I linked to.

But dont know yet how set click for "shock"

"For clickers, a good starting point would usually be about 1/3 to 1/2 of the way out. So, count the total number of clicks from fully closed and put them at 30% to 50% of that number. Then adjust them from there."
 
Back
Top