Stator Rewind

[dirt_rider93561]

Has anybody had their stator rewound? On my 09 TE510 my stator is dying, so instead of buying a new one from Husky I was thinking of having it rewound back to what it is or for more output if possible. Anybody had this done before and if so who by?

Dustin

 

[firecrackerkid]

You might check Ricky Stator. Don't know if they can do it or not but I got great results on my xr600 years ago.

 

[MuddyMan]

The only name that continuously comes up is ricky stator. Just type that name into google and it will come up with the website.
Good luck and let us know how it turns out.

 

[dirt_rider93561]

I have heard of Ricky Stator and I know they are a good company. Was just wondering if anybody has had their Husky stator rewound. I sent them an email to see if they can and how much it might be. It would be nice if they can for cheap and also get more power out of it. Nice to run a better light so I can actually ride at night and see where I'm going.

 

[andyman]

If they don't come back offering a re-wind service, Kelly does sell this 100watt trail tech one with a bigger regulator/rectifier.
http://www.motosportz.com/HVA-SS/HVA-SS-Trailtech.htm

 

[dirt_rider93561]

I already tried that route, but it is for the TXC and won't work for the TE. Thanks for the tip though. I got a reply back saying they still rewind stators and it will be $125.00, but I need to take some pictures of the stator to make sure that they can rewind it.

 

[andyman]

doh, my bad. thanks for posting back on the price. Good to know.

 

[dirt_rider93561]

Yeah and hopefully it will fix my problem and also allow us to get some more power out of the system.

 

[dirt_rider93561]

No go on Ricky Stator. They don't rewind stators like in the TE. He called it a straight 3 phase stator. He did tell me to try Custom Rewind. Have to do some research and see what I can find on them and see what they offer. Called them up and had to send him a picture of it. He got the picture and said he can rewind it. It will be $125.00 to rewind the stator and ship it back. So total will probably be about $135.00 and turn around time would be about 3 days in shop to rewind.

 

[BILLF]

I have been dealing with Custom Rewind for 20 years their Great folks and have gone above and beyond the call of duty on a few wierd stators I have gotten them into.Rickys has alsio been great,Gary and Steve at CR are just great folks.

 

[J.R.]

I think I've heard from someone who had their SMR stator respond by trail tech for more output.. The SMR stator would be the same as TE stator

 

[dirt_rider93561]

The stator is already down at Custom Rewind and they are going to rewind it for more power output. I think they are going to go to a bigger gauge wire than stock.

 

[J.R.]

Is that all thats done to get more wattage? bigger GA wire and maybe more wraps? Been a while since looked into it

 

[dirt_rider93561]

Yeah I believe they are doing more wraps with a bigger gauge wire. It's also been a while for me so don't quote me on it.

 

[dirt_rider93561]

Got the stator back and it deffently looks different. I can't tell if they put bigger wire in it or not, but they coated it with some green stuff to protect it from heat and oil. Hopefully bolt it up tonight and see what I get. It took a total of 12 days with shipping. Total cost was about $135. Here's a couple of before and after pics.

 

[J.R.]

Sweet! Let us know how much better the ought output is.