• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Starter Motor Info Thread - TE/TXC 250 310

Mucci

Mucci

Husqvarna
AA Class
I've been going down a rabbit hole with the starter motors found in the 2010-2014 250's & 310's so I thought I'd put this thread together of all the info I've gathered so others don't need to waste the same amount of time.

Part Number:
8000A7059 - $343.82 as of 7/2023


Power:
The FSM calls it both a 12v-350W (pg. A6) and 12v-450W (Electrical Section) starter. I'm inclined to believe the 450W is a type-o as these aren't known to be very powerful.

Output splines:
7-spline
This is the big issue in finding a replacement winding. I've cross referenced a ton of starter motors from this era and can't find any with 7 splines.

Manufacturer:
Mitsuba likely but haven't found hard evidence.
The only markings visible on the exterior housing seem to be ink stamped on the center section starting with "XGT00..." Some I've seen are XGT007XQ, XGT0017E, XGT00498.
I've tried to search for these numbers in a myriad of ways but haven't found anything on them.
"XGT" is also cast into the inside of the end cap.

Rebuild / Rebuild Kit Info:

Rebuilt Starter Motor
Rick's Motorsport Electrics
Part #: 60-909 $219.95 link
(as of 8/6/2020)

Brushes
It's been said by members that these work:
Rick's...
Part #: 70-106A link

Rebuild Kit (Brush plate, brushes, etc.)
From the information above and a side by side photo comparison it appears a rebuild kit (without motor winding) for a WR250F 2003-2013 or WR450F 2003-2015 would work:
Psychic MX
Part #: MX-01301A - $19.57 link



Please let me know if you have more info and I'll update this post.
 
You must log in or register to reply here.
Back
Top