• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc shorty clutch lever?

MotoXotica

MotoXotica

Husqvarna
AA Class
any body know of a shorter clutch lever that fits in the domino clutch perch of a newer Husky 125,250,300.prefer it to be a plug and play exchange.thanx!dan
 
These are the shorty levers I installed on my 2007 Husqvarna WR250.. :thumbsup:

Front Brake Lever: Moose Part # 0614-0066

1aaleverbrake.jpg


Clutch Lever: Moose Part # M559-50-17

1aaleverclutch.jpg


= = = = = = = = = = = = = = = = = = = =

If you use a Rekluse Left Hand Rear Brake

Clutch Lever: Moose Part # M559-50-27

1aaleverrekluse.jpg
 
ASV was the only one that l could find that you can buy the lever and mate it up to the std domino perch...you'll have to take the perch off and take it down the local dike shop and try a few levers.

Better off replacing the whole unit.
 
In the past, I´ve always made goog experience with the Wirtz Easy Pull Clutch Perch, but my new love is the Zeta FP-M! Way better quality than the Wirtz and (in my opinion) the haptics gives a better feeling.
 
You must log in or register to reply here.
Back
Top