• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

RECALL RESULTS:

mag00

mag00

Husqvarna
Pro Class
Got my Strada back today. I have not taken it for a test drive other than on/off the trailer, but it does start better.

But folks, there is some bad news, or good news, depending on your camp.



I wrapped my key in tinfoil and no EWS error. I wrapped my Terra key and got the EWS. That could be good or bad depending on how you feel about the immobilizer. I have issue with it, I purchased my bike with it for security and that function is gone.

There were three pages printed out, first page is the work order so not posting it.

recall-paperwork-1.jpgrecall-paperwork-2.jpg

GS911 Seems to work fine. BMSE 8543016

A little longer test drive shows subtle changes. I will run it more to get the adaption tables built for my riding style and environment. 100º today, starts better, idles faster, seems to have lost slight on the lower end, but not really, because if you twist, it don't bog, but you feel when it finally catches full at about 5k rpm, then it is happy.

I had one hiccup pulling out of the driveway first run. That was it. Please post up if your immobilizer still works.

Husky dealer is going to contact Husky to find out.
 
If you are right about the immobilizer function and I have no reason to doubt you I'm glad to see it go away.
 
FabOneUp said:
No EWS....that's fantastic news in this camp!!

Waiting on the 911 info. Thanks mag00!
Click to expand...

Just edited , seems to work just fine. I took pictures of the screen and they didn't turn out so good. I tried to save a file on the laptop, now need to transfer to this machine for processing and upload, if the file saved proper. I have a netbook that I use for diags, and mac for internet. Can be a hassle.

Kurts bike is still at the local shop, feel bad for the guy.

And my friend with the Strada was coming over with the trailer so we could get our bikes from Phoenix, and some kid in a Toyota ran into the back of the Suburban and trailer and messed that all up. I had to rent a trailer and pull with my mini van to get em back today. All is good, home safe and sound.

I will cut a blank key and see if it starts and runs. The tinfoil may not be a definitive test. For those with one key, this may turn out to be a big blessing.

edit: got blank and ews error now happens. It didn't right away though, it took trying to start it to get the ews, and it showed, then didn't show the showed in a cycle of 3 before it stayed on.
 
AutoScan Report
GS-911 version: 1603.1 Datapack version: 4.1
Serial Number: GS1 004 000
Firmware version: 0.246-0.137 Datapack version: 0.124
Registered to: mag00
Date: 6/10/2017 Time: 7:24:49 PM

Motorcycle Information

VIN: ZKH0H12B3DV004000
Mileage: 33803.0 km
Next service distance: 43756 km
Factory I-Level: K024-03-05-310
Actual I-Level: K024-03-05-311

BMS-E
BMS type:
BMS-E
Part No.:
8543016
Hardware Index:
C1
Coding Index:
00
Manufacture Date (YY/MM/DD):
2012-09-06
MCV:
0.6.4
FSV:
20.255.3
OSV:
2.3.1
Manufacturer:
Magneti Marelli
HWOE No.:
68352504
Factory I-Level:
K024-03-05-310
Actual I-Level:
K024-03-05-311
VIN model year:
2013

No fault codes found

ABS8M
Part No.:
8538816
HW Version No.:
D0
Coding Index:
0
Manufacturing Date:
2012-01-13
HWOE No.:
68318392
Manufacturer:
Bosch
MCV:
0.6.5
FSV:
1.2.0
OSV:
3.4.32
Variant:
H61 SM Street Motard

No fault codes found

Kombi-18
Cluster type:
Kombi-18
Part No.:
8543235
Hardware Index:
C0
Coding Index:
03
Manufacturer:
MTA
Manufacture Date (YY/MM/DD):
2012-09-17
MCV:
0.6.4
FSV:
1.5.0
OSV:
3.3.10
HWOE No.:
68353696
Assembly No.:
8543235

No fault codes found
 
thanks. Did you try if the GS911 can still do the engine diagnostics, TPS, adaption resets etc? No need to do a reset but just if it can still get to those levels and can read e.g. the TPS angle, do a fuel pump test etc.
 
Mag00, pleased to see it is mostly good news, condolences to your mate re the trailer

Re running it a little more, it will not change the adaption table but the trims will adjust, the adaption table is fixed

The Husky/KTM Ops report page 2 indicates the Operating System (OSV) is reporting the same version as are most of the BMW status fields including the Firmware Version (Part No. 8543016). They have updated the File System Version (FSV) from 20.30.2 to 20.255.3 so the changes MM have made are as expected only some small fine tuning changes

It looks like they have added a new field for their Hardware No (825b28) which suggests it is firmware beta 28

The diagnose Index looks odd (6060) which may be either a mis read of the BMW Index or a new field they have added to fit with KTM system

The KTM software is reading the serial No of the BMS-E which GS911 does not provide, check that against the label on the BMS-E

I would expect the full BMW diagnostics routines will be operational and since the GS911 is still reporting Part No. 8543016 that the BMS-E could be programmed back to the last BMW version if connected to the BMW Dealer Programming System

Re getting Autoscans, use the email button in GS911, it will email results via the default email program on the PC/MAC and if the PC/MAC is not connected to the internet simply queue the email to send to the email address specified for next time it has internet access, it is the way I normally do it to email the results to myself when away from home base diagnosing a bike for people

As for getting screen shots, mobile pics are a waste of time, using the "Print Screen" button on a PC/MAC or knowing the short cut keys for Print Screen will give the best results on either PC/MAC you simply have to name the file for each screen shot
 
WayneC. I wonder if we can put the changes MM are doing into laymans terms, please....

From what I can see MM are updating the firmware in the ECU (and perhaps the software to the latest 8543016 if needed, we really need someone with the previous version to send their unit in and see if it comes back with 8543016 on it) and either one or both ungrades seem to be having the desidered effect.
 
kiwiape said:
WayneC. I wonder if we can put the changes MM are doing into laymans terms, please....

From what I can see MM are updating the firmware in the ECU (and perhaps the software to the latest 8543016 if needed, we really need someone with the previous version to send their unit in and see if it comes back with 8543016 on it) and either one or both ungrades seem to be having the desidered effect.
Click to expand...
In order to analyse what they are doing further we would need to see info like Mag00 has posted from more machines and in particular GS911 Autoscans from machines before and after the recall update, the most important would be one with firmware version 8532184/8532185 the earlier EU/US firmware version

I would hope that any BMS-E received by MM with 8532184/8532185 firmware was first updated to 8543015/8543016 before the MM update was applied
 
I live in Medford, NJ 08055 and I am going to take my bike to Central Jersey Cycles (unless you guys have a better idea, because the guy there doesn't seem all that friendly) this fall for the recall (already spoke with him and he said 15-30 days he would have bike). I bought my bike with 400miles from the original owner who road it for two months, had it serviced at Toy Tech in PA once, and then it has never been back to a dealer and I have 6,600 miles now. Would someone with a GS911 near by me want to run it on my bike before and after I take it in? Would that help you guys? I would guess I have the original software version from the factory.
 
rj95lss said:
I live in Medford, NJ 08055 and I am going to take my bike to Central Jersey Cycles (unless you guys have a better idea, because the guy there doesn't seem all that friendly) this fall for the recall (already spoke with him and he said 15-30 days he would have bike). I bought my bike with 400miles from the original owner who road it for two months, had it serviced at Toy Tech in PA once, and then it has never been back to a dealer and I have 6,600 miles now. Would someone with a GS911 near by me want to run it on my bike before and after I take it in? Would that help you guys? I would guess I have the original software version from the factory.
Click to expand...



15-30 days? I had mine back in 7. Husqvarna says 7-10 days.
 
mag00 said:
edit: got blank and ews error now happens. It didn't right away though, it took trying to start it to get the ews, and it showed, then didn't show the showed in a cycle of 3 before it stayed on.
Click to expand...


I just saw this edit. Thats a bummer for sure. Thanks for the efforts Mag00. You are very much appreciated! :thumbsup:
 
rj95lss said:
I live in Medford, NJ 08055 and I am going to take my bike to Central Jersey Cycles (unless you guys have a better idea, because the guy there doesn't seem all that friendly) this fall for the recall (already spoke with him and he said 15-30 days he would have bike). I bought my bike with 400miles from the original owner who road it for two months, had it serviced at Toy Tech in PA once, and then it has never been back to a dealer and I have 6,600 miles now. Would someone with a GS911 near by me want to run it on my bike before and after I take it in? Would that help you guys? I would guess I have the original software version from the factory.
Click to expand...



I think it's time for a call to Husky. That is a safety recall and demands instant action! or just ask the DOT what they think about that responce. Husky may have to pull there ticket if that attitude lands them in court.
 
Had the recall done last week. Everything was great until today. 2Nd side since the recall and now I have an "EWS" error and no start. "Posted in the Canadians with stalling" thread.

Never had an issue with bike until now. I'm pretty pissed since the dealer is 300km round trip And most likely I'll have to drop it off and go back for it........again.
 
James Rideout said:
Had the recall done last week. Everything was great until today. 2Nd side since the recall and now I have an "EWS" error and no start. "Posted in the Canadians with stalling" thread.
.
Click to expand...


Do a search for "ECU bad ground" or "ground wire from ECU". You might be able to fix that EWS problem yourself.


Matt
 
You must log in or register to reply here.
Back
Top