CoS
Husqvarna
A Class
I recently bought a low hour 2001 CR250 Husky.Just a little history about the bike. I am the 2nd owner. This bike was sitting in a shed for 12 years not being rode. I made an offer and my friend accepted. So I brought the bike home and checked every thing out on it and put some new parts on it like handle bars,Bark busters, oring chain, Renthal rear sprocket and tires because the stk tires where dry rotted. So once I got it all set up I took it for a ride and after about 15mins of riding I went into a turn and hit the back brake and it was like it wasn't there, no REAR BRAKE. So I thought that I may have missed it with my foot so i didn't think nothing of it. Then about 10mins later and riding it, I went to use the back brake and it did it again. I was going into a turn and hit the back brake and nothing. So my question to anyone that could help me out with this issue is what can be the cause. This is what I didn't do so far. I didn't change the brake fluid in the back brake or in the front. Not sure if that is the issue. If anyone ever experienced this please share what the fix is.. I do plan on changing the fluid because it is 14yrs old. The pic is the condition of the bike how I brought it home and one of how it looks now.




