• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

ran out of gas..now wont start

so after going through everything it wasnt that it ran out of gas at all. The lower rod bearing went out. It would crank for a bit then lock up. then we could take the ignition cover off and turn it with a wrench then it would crank again, then lock again. so we took the clutch cover off everything looked ok. So we decided to take the motor out and take the top end apart everthing looked fine there then noticed the lower rod bearing would barely move. so anyone have any sugestions on where to send out the motor thinking since i have everything apart and going ot have to put money into just going to do the 310 right away.
 
Well I'm in NEW Berlin, in wisconsin. talked to george a little and think im going to send the motor out to him and put the 310 on it.
 
Well I'm in NEW Berlin, in wisconsin. talked to george a little and think im going to send the motor out to him and put the 310 on it.

George made my 09 250 into an 09 310 last year. Whole new bike afterwards. I also put on a JD jetting to tweak it a bit more.
 
Back
Top