• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

[q] shorte side stand with wider base for TE 630

W

worker

Husqvarna
AA Class
Hello,
is there an aftemarket (or from different model) side stand I could purchase?
I have short inseam and after installing some side bags and top case -- I cannot dismount the bike. As I cannot place left leg on the ground and swing the right leg over.

I need a side stand I could kick up and then dismount by relying on the foot peg
(I am also 260 lb so the stand needs to be strong).

I tried following the side stand thread here, but could not conclusively see if there is working, read to purchase option.
 
I shortened my stock te stand for use with SM wheels, and it just barely holds the bike up with the te wheels on. I don't dare try adding my weight to the stand when set up that way. I really don't think the mount on the frame is strong enough to support a riders weight, and the bike, with stock stand length and bike angle, and I think it would be worse with the shorter stand.
 
thx. I actually thought it is ok to use the stock stand, and and stand on the foot peg to mount it. Is that wrong?

Also if the stock stand cannot be shortened, what's the solution for somebody with short inseam to dismount while there is bags and things on the back?
 
The stock stand isn't strong enough to support you, the owners manual definitely recommends against it.
I was lucky enough to purchase the fabled Webb stand which works great!
 
@bushwa, thank you.
The video shows how to mount, barely but I can do that, and if without safety gear pants.
THe bigger problem however is dismounting.
Also the bike for the guy on the video is too short compared to how the TE 630 aligns to my waist.

To dismount I have to have left fit on the ground (as there is no side stand on the TE 630 that can be deployed while sitting on the bike).
When I put the left fit down, I cannot swing my right fit such that it clears the side bags and the top case.
 
You must log in or register to reply here.
Back
Top