• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Pro Moto Billet Pannier Protectors

wncstrada

Husqvarna
B Class
Hi Folks!
For those of you who have the Pro Moto Billet rear rack and the Pannier Protectors, Did you have to drill the attachment holes for the pannier protectors in the rack, or were they pre-drilled from the manufacturer? I just got my new rack tonight, and I'm a little puzzled. Thanks!
 
wncstrada;93099 said:
Hi Folks!
For those of you who have the Pro Moto Billet rear rack and the Pannier Protectors, Did you have to drill the attachment holes for the pannier protectors in the rack, or were they pre-drilled from the manufacturer? I just got my new rack tonight, and I'm a little puzzled. Thanks!

You have to drill them. I mounted mine on the inside of the rack and had to do a bit of fitment.
 
wncstrada;93099 said:
Hi Folks!
For those of you who have the Pro Moto Billet rear rack and the Pannier Protectors, Did you have to drill the attachment holes for the pannier protectors in the rack, or were they pre-drilled from the manufacturer? I just got my new rack tonight, and I'm a little puzzled. Thanks!

miketv;93102 said:
You have to drill them. I mounted mine on the inside of the rack and had to do a bit of fitment.

Yep, you have to drill them out. I used the screws that came with the rack and they sheared off during a ride in the middle of the desert in Oregon. I ended up safety-wiring it for the rest of the trip. I used higher grade bolts to replace them and have had no issues since.


OR_NV_Sep09094.jpg



OR_NV_Sep09100.jpg



You might want to beef up the cast aluminum thing under the fender that has the turn signals attached to it. I broke mine twice. I had additional aluminum welded to it and it is solid now.

NevadaT-Day09008.jpg


NevadaT-Day09005.jpg


NevadaT-Day09003.jpg




WoodsChick
 
Back
Top