post your last purchase for your 630

[CJBROWN]

I Posi-tap'd the relay lead into the switched hot for the 5w running light in the headlight housing.

That's how I powered my GPS lead. Works great. Powered up with the key, draws so little.

The fuze block is a great idea though if you have a bunch of powered accessories.

 

[jtemple]

I just don't get why in the heck the 630 does not come with black wheels, I would give anything to have black wheels on my TE

Sethro

I'd just scratch the heck out of them changing tires.

 

[CJBROWN]

You can pickup a set of black excel's, easy. Or take yours off and have them powdercoated.

They do scratch easier, but stay nice for a long time. 3 of my 4 bikes have black rims. A couple of pieces of plastic under the tire irons keep them from getting scratched while tire changing. Scratches can be touched up with a black sharpie pen.

 

[sethro]

You can pickup a set of black excel's, easy. Or take yours off and have them powdercoated.

They do scratch easier, but stay nice for a long time. 3 of my 4 bikes have black rims. A couple of pieces of plastic under the tire irons keep them from getting scratched while tire changing. Scratches can be touched up with a black sharpie pen.

Yes I am going to get me a extra set of wheels this summer and keep more street orientated tires on one set and full dirt on the other. Might try those wheel sets with the pretty red hubs .

A Coats 220 tire machine in the garage helps with the scratching problem

Sethro

 

[Whatevier]

I just don't get why in the heck the 630 does not come with black wheels, I would give anything to have black wheels on my TE

Sethro

No idea really.. black rims and a little bigger rear rim (so u can fit 160 tires without problem in the SMS) should be a must from the factory.. maybe they want you to buy some Excel Rims or sth..

but well.. it's a nice feeling when you change something yourself..
and it's a not so costly change.. 70 euros for 2 rims and the 4 exhaust guards for powercoat paint (i don't know if i got the name correct, its called electrostatic here) sounds like a good deal to me..

taking em apart and putting them back together is rather costly though (and everyone told me it's something i shouldn't try myself so.. bye bye my euros.. but bah my next tire change would be in a year, so i couldn't resist)

 

[Whatevier]

You can pickup a set of black excel's, easy. Or take yours off and have them powdercoated.

They do scratch easier, but stay nice for a long time. 3 of my 4 bikes have black rims. A couple of pieces of plastic under the tire irons keep them from getting scratched while tire changing. Scratches can be touched up with a black sharpie pen.

Nice little tip there!
I was a bit worried about the tire change, but i think everything will turn out all right.

 

[johngil]

Fork re-valve and compression adjusters from ESP. Hope this does the trick up front.

 

[BiG DoM]

My white Safari is in my local UPS truck right now and I'll have it today. I REALLY want to find a way to make the bottom part of the tank black and intend to go to my local plastic fabricator for some scraps of PE plastid for experimentation purposes. I intend to try the Krylon and black die. what I'm thinking of is coating one side and then finding a way to contain gasoline on the other, then let them set for a few weeks to see what happens. The hard part with the die is leaving the top white. Maybe some fineline masking tape would prevent the die solution from migrating. Like I said, it's going to be an experiment. What ever happens will take place before the tank is mounted and while it is still clean. Failure on the final product could get ugly!

There are many plastic wrap products on the market now and the colour of most parts of a car or bike can be easily changed and reversed if necessary. I would seriously consider this option first. They sometimes slightly perforate the covering (as they do with tank stickers) as some tank platics 'breath' fumes. There are though a large variety of vinyls that they can choose from. The plastic will not paint or dye well.

 

[Kenneth Webb]

There are many plastic wrap products on the market now and the colour of most parts of a car or bike can be easily changed and reversed if necessary. I would seriously consider this option first. They sometimes slightly perforate the covering (as they do with tank stickers) as some tank platics 'breath' fumes. There are though a large variety of vinyls that they can choose from. The plastic will not paint or dye well.

I'm going to check on that. After much research, I fear you are correct. No paint or dye on PE plastic.

 

[CJBROWN]

Motorcycle decal printers can put them on perf vinyl. They'll stay put for a longggg time.
Not very expensive either.

Here's a custom set of decals we did for my kid's new WR because he didn't want a 'blue' bike. Yes, it's a WR250F!

 

[SilverBullet]

Fork re-valve and compression adjusters from ESP. Hope this does the trick up front.

Very interested to hear how this turns out and the costs involved. Please post a review after.

_

 

[JoiseyJanet]

Motorcycle decal printers can put them on perf vinyl. They'll stay put for a longggg time.
Not very expensive either.

Here's a custom set of decals we did for my kid's new WR because he didn't want a 'blue' bike. Yes, it's a WR250F!

Wow! That is just too pretty for the dirt. Love the design!

 

[Kenneth Webb]

That is a beautiful piece of work. This morning I talked to the wrap folks and learned a bit. The perforated vinyl is much tougher than the solid, and will not take curves and other deformations in the tank. I snagged a piece of the solid and have it stuck on my WR's Safari tank as a test, but what I think I'll do is think about using several pieces of the perforated on the broad countour areas of the 630 Safari tank, letting the white show thru as done above. I really like the graphis on your son's tank and something like that on the lower section of the tank would go a long way toward minimizing the bulky look. I'll have to do some research on designs and see if there is anything out there in useable form. Where did you get the graphics on the WR?

 

[BiG DoM]

Some printed peforated vinyl graphics on a friends SE Safari tank

 

[Kenneth Webb]

I looked up Stellar mx on the web but my computer sez it is a malicious web site! I have a call in to them. Nothing for the Safari, but maybe they could do it.

 

[JoiseyJanet]

. . . what I think I'll do is think about using several pieces of the perforated on the broad countour areas of the 630 Safari tank, letting the white show thru as done above. I really like the graphis on your son's tank and something like that on the lower section of the tank would go a long way toward minimizing the bulky look. . . .

Sounds like a great idea. Look forward to the pics.

View attachment 13765 Some printed peforated vinyl graphics on a friends SE Safari tank

Thanks for posting the pic of your friend's Safari tank w/ perf vinyl graphics. I've got a similar windscreen (for a 990SM) to try and work on the TE630.

Love the Red Bull graphics on a KTM. I've got a fresh set to apply to my 400exc, but am waiting until I biff less in the rocks.

 

[Rsquared]

You can pickup a set of black excel's, easy. Or take yours off and have them powdercoated.

The heating process used in the powder-coating will remove the tempering from the wheel and make it easier to bend...

 

[JoiseyJanet]

Installed a KTM Touring Windscreen for a 950/990 Supermoto.
Bought some stainless bolts and rubber washers from our local hardware. The screen fitted up nice and firm.
I like my screens small and simple, and this one gets the wind off of my chest. Wind is up at the helmet faceshield now on my short torso (5'4" w/ 29-inseam), and there is not any flopping of the screen.

Here are some measurements after installation:
The top shield bolts are a quarter inch down from top of headlamp plastic.
Top of shield is 7 inches above headlight plastic at center and 6.5 inches above at sides.
The shield itself is 10 inches high at center, 11 inches high at sides.
Shield is 9 inches wide at top and 11 inches wide at its widest (near bottom).
Very bottom of shield is 6.5 inches wide.

KTM makes several touring windscreens for their bikes.

This is what I got:
http://www.ktm-parts.com/62608065000.html

And another model that might work and looks good and may afford a little more protection (appears to be taller and perhaps a touch wider):

http://www.ktm-parts.com/76508065000.html

Other KTM screens:

http://www.ktm-parts.com/mm5/merchant.mvc?Store_Code=K&Screen=SRCH&Search=windscreen

 

[BiG DoM]

Must say looks good - could be OEM as all the shapes and angles match up perfectly.

 

[SilverBullet]

Good find and very nice. I am usually against windshields but this one compliments the bike well. Best thing it is so easily mounted and completely reversable. Just buy an extra stock Husky fairing for $35 and you can revert back to stock in literally 10 seconds.

_