• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Over Rev Lamp came on!!

J

JRCarp

Husqvarna
AA Class
I have an 06 610.
I just turned 5500 miles this weekend on a couple of long rides I did.
Twice while crusing my Red Over Rev Lamp lit up for just a second.

First time I was going about 65 in 6th on highway and it just flashed on for a second. I think I noticed this right away but by the time I looked at it, it went off.
The second time was the next day was just rolling down a back road about 55 in 6th again and it flashed for just a sec. This time it was dark so I noticed it right away, by the time I looked down it went off.

Both days were long days around 250 miles each and probably 4 to 6 hours running time and both time it happend near the end of the ride.

Any one ever have this happen?
Am I looking at a potential problem or failure?


Thanks,
John
 
My '08 has flashed every once in awhile since around 500 miles. It kind of shocked me at first, but then as I didn't notice anything funny I didn't worry about it. Same thing with my '99 F-150, sometimes the odometer wants to appear and sometimes not. I chock it up to the world of computers!
 
The red shift light or over-rev light is adjustable for what rev you want it to come on at. If you have had the battery off or the CPU has sneezed & reset itself, then you will have to go in & set it to when the light comes on & at what rev it does.
Check out this link to SMJ. They were talking a lot back in 2006 & 2007 about how to reset this & change that concerning the gauges.....I though the stock setting was around 8250 RPM. GL




http://www.supermotojunkie.com/showthread.php?t=12917&highlight=610+reset
 
BadMotoWeazal;39446 said:
The red shift light or over-rev light is adjustable for what rev you want it to come on at. If you have had the battery off or the CPU has sneezed & reset itself, then you will have to go in & set it to when the light comes on & at what rev it does.
Check out this link to SMJ. They were talking a lot back in 2006 & 2007 about how to reset this & change that concerning the gauges.....I though the stock setting was around 8250 RPM. GL




http://www.supermotojunkie.com/showthread.php?t=12917&highlight=610+reset
Click to expand...

The rev limiter is set for 8250, it begins shorting out the ignition before the engine disassembles itself and is not adjustable. The red shift light is adjustable and should probably be set for something a bit lower than the rev limiter.
 
I doubt that i've ever hit 8250, so mine must have been set or set itself lower. I don't think it's flashed more than 1/2 dozen times. I think it's a glitch, but i'll check the setting. Thanks RBG!
 
Thorton98;39479 said:
I doubt that i've ever hit 8250, so mine must have been set or set itself lower. I don't think it's flashed more than 1/2 dozen times. I think it's a glitch, but i'll check the setting. Thanks RBG!
Click to expand...

A glitch in the system would be my guess, the factory computers aren't really noted for their ease of use or reliability.:cheers:
 
Interesting. Does anybody know if 8250 has always been the redline? All the Husky specs I've seen have just listed the redline as N/A which sounds like a challenge ;)

(Reason for the question... it'd be nice to know to set it on the new Acewell computer)
 
nachoman;39492 said:
Interesting. Does anybody know if 8250 has always been the redline? All the Husky specs I've seen have just listed the redline as N/A which sounds like a challenge ;)

(Reason for the question... it'd be nice to know to set it on the new Acewell computer)
Click to expand...

Oh I'm sure that any of the 570's or uncorked 610's are easily capable of breaching that barrier. I've hit the rev limiter several times, because it never feels like the power is ready to sign off but I doubt that it's a good idea to run them much higher than that for any length of time or they may go into auto-disassembly mode.
 
Thanks all!
I never did figure out how to change the max revs or even see what it is set at.
Once I was in some menu somewhere and did see 825 but don't remember where I was.

I did however figure out how to get rid of the lap timer and other timers, I hated having to go through all of them to get back to mileage or reset the trip meter every time.

Thanks again for all the replies.
John
 
Not completely sure what you're talking about, but the big(ger) red light that can come on is pretty much a malfunction indicator. Check and make sure you don't have too much or too little oil. Thats when I've seen mine come on- when I put too much oil in it.
 
brisendines;39977 said:
Not completely sure what you're talking about, but the big(ger) red light that can come on is pretty much a malfunction indicator. Check and make sure you don't have too much or too little oil. Thats when I've seen mine come on- when I put too much oil in it.
Click to expand...

Huh, that's interesting! In my manual, pg. 14 shows that #6 "MAX ENGINE r.p.m" warning light comes on after that the vertical and horizontal "LED" indicators have completed their stroke: 8250 r.p.m. approx.) I did not know that oil could have an effect on that light. Definitely something to consider!
 
Oh, trust me... it does come on when you over-rev it too. Cranking out those first gear wheelies taps the light pretty quick.
 
I'll check that too, but I did during that ride and it was right in the middle of the Oil window.
It's got about 1K on it since the last oil change and this was during 500 of those miles.
 
The stock speedo is junk and will eventually fail all together. Mine lit up like a christmas tree before it went. But, I am sticking to my story of the 143mph in 3rd gear that it recorded. When I finally took mine off, it rattled inside from broken plastic bits. The TrailTech Vapor was a reasonable alternative.
 
Hey JRCarp, I had that exact same thing happen under almost the exact same conditions. 6000 miles on bike. Over 200 miles that day when it came on. Was riding about 70 mph in 6th. Came on for just a second. My bike is geared a little lower than stock but at 80 mph I'm only turning 6000 rpms. So, I know it was not over-revving. My oil-lamp indicator light has been on for a while. This is the light for the first engine oil replacement at 620 miles. Long since done that and others. Not sure why light is on but maybe if computer thinks bike is still being broken-in, it has different parameters for the over-rev light.
 
Big E;40215 said:
Not sure why light is on but maybe if computer thinks bike is still being broken-in, it has different parameters for the over-rev light.
Click to expand...


You need to turn it off manually, it doesn't go out by itself. I forgot what the procedure was. I'm sure someone will chime in with the link.
 
Just found it....

How do you get the oil can symbol to disappear




1 Hold gauge button 7 count

2 Turn key to on while still holding button

3 Wait till screen is blank while holding button then let go

4 Now you can press the button individuale times to scroll through all the options

5 when you find your option press and hold on it

6 It then says yes or no on or off press once to go back an forth hold to select then turn key off
 
You must log in or register to reply here.
Back
Top