jonboat
Husqvarna
I bought a low milage '07 TE510 about 3-4 years ago. I hardly ride it but when I do I am so glad that I have it. The other day I was going to take it for my annual state safety inspection and I was pushing inwards on the kickstand to try to get the bike to stand up a little staighter, well I broke one of the kickstand bolt tabs off of the frame. I'm pretty sure I will need to have some kind of side stand to pass PA state inspection. Has anyone found a Ricochet swingarm mounted kickstand that will fit a TE510 swingarm?
One other concern is the smell of coolant that I notice while being around the bike just working on it in the garage, after a ride I smell coolant also. There are no coolant leaks and the fluid level remains consistant. This is my first water cooled motorcycle and I was wondering if the coolant smell is normal?
I changed the oil in the bike when I got it using the Motul 10w 60 oil that was recommended in my service manual. I only have about 500 easy miles on the oil but I would like to change it again. Would it be OK to switch from the expensive hard to get Motul oil to Rottella synthetic that I use in my other dual sport bikes?
Please excuse my ignorance about this type of bike. Thanks for any input to my concerns.
One other concern is the smell of coolant that I notice while being around the bike just working on it in the garage, after a ride I smell coolant also. There are no coolant leaks and the fluid level remains consistant. This is my first water cooled motorcycle and I was wondering if the coolant smell is normal?
I changed the oil in the bike when I got it using the Motul 10w 60 oil that was recommended in my service manual. I only have about 500 easy miles on the oil but I would like to change it again. Would it be OK to switch from the expensive hard to get Motul oil to Rottella synthetic that I use in my other dual sport bikes?
Please excuse my ignorance about this type of bike. Thanks for any input to my concerns.
