250-500cc MY NEW PROJECT WR 250 2002

[fredd]

this is going to be like my 2007 wr 250.

 

[Motosportz]

nice, should be a great bike. Love the 02-04 models.

 

[fredd]

nice, should be a great bike. Love the 02-04 models.

im going to put a 2005 250 tc gas tank and seat.the other parts are bolts on.maybe i have to weld the center spigot of the tank and the low supports but other than that i think is a very straight foward change.

 

[Motosportz]

im going to put a 2005 250 tc gas tank and seat.the other parts are bolts on.maybe i have to weld the center spigot of the tank and the low supports but other than that i think is a very straight foward change.

To each his own but thats a step backwards to me. Love the slim 04 ergos and low seat height. The aftermarket tank is also FAR better for the 2000-04, slim and carries the fuel very low. The one for the 05-08 is huge, wide and tall and IMHO kinda horrible. Just food for thought.

 

[Motosportz]

You can make those bikes look pretty good with the stock style plastic IMHO...

 

[fredd]

You can make those bikes look pretty good with the stock style plastic IMHO...

sorry i cant see the picture can you posted again

 

[troy deck]

You can make those bikes look pretty good with the stock style plastic IMHO...

is that ur 02 250 or 04 165 or some other blast from the past? it looks good whatever it is

 

[reveille]

It looks better than good!

 

[Motosportz]

Old pic. Thats my 04 CR125 I bought new. I have had about 6 125s. Who knew 10 years would go by and I'd still be buying the same bikes!!!

 

[fredd]

To each his own but thats a step backwards to me. Love the slim 04 ergos and low seat height. The aftermarket tank is also FAR better for the 2000-04, slim and carries the fuel very low. The one for the 05-08 is huge, wide and tall and IMHO kinda horrible. Just food for thought.

the problem is i have a new set of plastics of my 2007 wr 250 and a new set of graphics and i want to use them.

 

[yzrider]

Where do you get graphics for the 02-04 bikes?

 

[Hoov165x]

im going to put a 2005 250 tc gas tank and seat.the other parts are bolts on.maybe i have to weld the center spigot of the tank and the low supports but other than that i think is a very straight foward change.

NO****************************************************************************************************************************************************************!!! Don't do it********************************************************************************************************************************************************************************************************! Arghhhhhhh****************************************!

 

[Hoov165x]

You can make those bikes look pretty good with the stock style plastic IMHO...







'05 CR sidepanels slim the look a little and make the bike look better...............
You can see the difference, right? They look less heavy/bulky in the top two pics.

 

[fredd]

some changes 2005 tc 250 gas tank and plastics.a little work fitting the tank but overall easy job.

 

[juicypips]

humm, easy acess to foweld plugs good place to warm up cold wet gloves when you stop, i can see the advantage of a higher tank.
with a lectron on it and run it half empty then the cg wouldnt be too bad.

ohh fredd get that expansion chamber off that coolant hose they chaff and wear thin if left like that too long.

 

[fredd]

taking shape.remember it was a 2002 wr 250.

 

[fredd]

View attachment 38477
taking shape.remember it was a 2002 wr 250.

 

[juicypips]

love the piston under the side stand
looking like a fun clean machine fredd

 

[fredd]

love the piston under the side stand
looking like a fun clean machine fredd

wait for more.

 

[fredd]

li
like new