250-500cc My first ride on a WR250 2009mdl

[Motosportz]

I had to help PC out of a hole like that once

 

[sean]

Class pictures

 

[PC.]

I had to help PC out of a hole like that once

Thanks

I'd probably still be there had you not noticed me and the bike fell off that bridge.

Actually, I'm pretty sure one of the winter storms would have washed me to the Wilson river and then out to sea by now.


On topic....
Those are some cool pics you posted dude!

 

[Anthony_1978]

I had to help PC out of a hole like that once

hey Kelly, how you going with my rekluse & LHRB. i have not heard back for a while

 

[wombat]

what is that thing on your power valve cover with the cooling fins?

 

[Anthony_1978]

what is that thing on your power valve cover with the cooling fins?

I guess your referring to 'sean' from the UK's bike
that's a power valve adjuster. check it out:-
http://www.cafehusky.com/forums/showthread.php?t=9527

 

[wallybean]

Anthony,

Do the 6 speed swap and you will really like that bike. Especially with the rekluse pro and LHRB. That was the setup I had on my 06 and it was a really sweet bike.

Walt

 

[Anthony_1978]

Anthony,

Do the 6 speed swap and you will really like that bike. Especially with the rekluse pro and LHRB. That was the setup I had on my 06 and it was a really sweet bike.

Walt

sounds great. where can i get a 6speed? i assume i need a donor
wr360 bottom end. anyone know where to get one?
i took my bike out yesturday and transports suck with a 5speed

 

[wallybean]

Anthony,

1991-1998 non-cr 250's, 260's and all years of 360 except for the cr's they made in early 90's, I believe 92 and 93. You can usually find one of these around if you are patient for $400-$500 US. Part it out and hopefully you can get all the tranny parts for very little. These are really bullet proof trannies so every one that I have seen has been completely usable.

Walt

 

[Anthony_1978]

Anthony,

1991-1998 non-cr 250's, 260's and all years of 360 except for the cr's they made in early 90's, I believe 92 and 93. You can usually find one of these around if you are patient for $400-$500 US. Part it out and hopefully you can get all the tranny parts for very little. These are really bullet proof trannies so every one that I have seen has been completely usable.

Walt

Great info. thanks mate

 

[Croc]

There was a WR360 motor on Ebay in QLD that sold for $300 last week or try here

http://www.jdk.com.au/

 

[Anthony_1978]

There was a WR360 motor on Ebay in QLD that sold for $300 last week or try here

http://www.jdk.com.au/

Thanks mate

 

[Anthony_1978]

There was a WR360 motor on Ebay in QLD that sold for $300 last week or try here

http://www.jdk.com.au/

i sent them an email... it seems a lot more expensive than i thought

can anyone in the US help

heres an extract of the email
We have what your after in stock. With two options for you
Bear g/box $595.00
Or short engine
$895.00
Basically the short engine is a complete bottom end minus clutch, stator, flywheel etc

 

[nqjim]

i sent them an email... it seems a lot more expensive than i thought

can anyone in the US help

heres an extract of the email
We have what your after in stock. With two options for you
Bear g/box $595.00
Or short engine
$895.00
Basically the short engine is a complete bottom end minus clutch, stator, flywheel etc

Keep your eyes open on ebay. I picked up a '98 WR360 gearbox a couple of weeks ago for $120 delivered! It's going into the 300 as soon as the top end needs attention.

 

[R_Little]

I had to help PC out of a hole like that once

At least the motor is not submerged!

Rich