Magnificent 7

[cruisetopdown]

500 hundreed piper done and blued

You've got some "Mad Skilz" ........

 

[dartyppyt]

Thanx guys!

Rest of materials arrived to finish the 430 pipe.

Next up, going to order materials for the 83 CR 250.

Then I'm done with pipes.

 

[dartyppyt]

Working on 430 piper! Stalled on finishing the cylinder paint job. Then that has to go on so I can align piper up to fit.

I think your gonna like the cylinder art work!

However, I have been working on the pipes,cuts,fitting and welding some.

Feel like Peter Piper Picked a Peck of Purple Piper Parts!

All my piper parts to build the 83 CR 250 piper are on their way.

 

[dartyppyt]

This is the 430 cylinder. Had to do it this way since I notice a cracked strap that runs up and down plus a cracked fin.

So I welded in a section of aluminum and just put the Husky lettering on it.

Same on both sides.

 

[eddychecker]

Better to find the crack now. Nice repair.

 

[dartyppyt]

Better to find the crack now. Nice repair.

Thanx! Glad we think alike on that one.

I had to shave a fin down so that's why I had to do it that way. Couldnt get the tig tip back in there.

 

[dartyppyt]

Now I can finish pipe this weekend! Meow!

Looks sharp in person!

 

[oldbikedude]

Nice work! as usuall

 

[dartyppyt]

Nice work! as usuall

Thanx OBD! Hope to see how pipe looks on it.

Hopefully get some pics up by Sunday night.

 

[dartyppyt]

Progress!

 

[dartyppyt]

Pipe done and may blue yet?

This piper I did a brass Husky badge on to match gold scheme.

This is what 25 hours work lands you.

 

[dartyppyt]

I call that piper...... Masterblaster!

Who run Bardertown ? Masterblaster!

Should have plenty of Torque!

 

[oldbikedude]

Great looking pipe....you will be known for your pipes soon.

 

[jimspac]

I like that one better than the earlier one you did. The shorter cones look so much more professional

 

[dartyppyt]

Great looking pipe....you will be known for your pipes soon.

Thanx OBD!

Almost half tempted to make the 83 CR 250 one a snail one. I think I have a silencer that I can use on the end.

 

[dartyppyt]

I like that one better than the earlier one you did. The shorter cones look so much more professional

Yeah I like this one too but heck of a lot more pipe cuts, fitting joints and a lot more welding.

 

[Bigbill]

I welded a Yamaha pipe to a husky 83/250 pipe. With the curly Q in the beginning. It came out ok and ran ok but yours looks awesome. A lot of work goes into making these.

Let me know if your going to sell these.

 

[dartyppyt]

I welded a Yamaha pipe to a husky 83/250 pipe. With the curly Q in the beginning. It came out ok and ran ok but yours looks awesome. A lot of work goes into making these.

Let me know if your going to sell these.

Bill,

Thanx for asking but.........

Not at the moment. I work mon-fri easy 60 hrs week. So all I have is weekends, plus I want to get these finished.
I have couple gas tanks to do for a friend and guy on here. That's it..... I've turned down about 10 tanks to removed dents and paint since Fall. Plus, I gotta start on me Maico to finish as well.

 

[dartyppyt]

Ok, so here is my next piper for two fiffy!

Believe you me, I almost turned this one into a snail pipe but I did not have the right end silencer in my arsenal.

Think I will do some digging to find the right one that would work. It has to have a snap ring in the bottom of it so I can repack it and also weld right into the pipe.

I had it mocked up with masking tape. It does look bad ass, so think I'll do one for fox bike.

You will always know my pipe cause I put a husky badge on them.

This one was lil tough to get end perfect for my silencer. I still have to make a silencer bracket but had to wait till pipe was done.

I'm stalled out because i ran out of Argon gas for my tig welder.

 

[dartyppyt]

Just putting some final touches on the 125 pipe.

I did the badge in stainless and brass to give it a rustic look with the black and gold tank.

Also, if you remember I did the XC on it.