• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

All 2st lectron whattttt???

surfingboyo

surfingboyo

Husqvarna
AA Class
What the hell secures or retains the outer of the throttle cable to the carb?
The mikuni had a retainer built into the carb lid, this lectron has nothing to retain it (but I could being retarded)?
At the moment if the cable got snagged on something the bike would go full throttle...

Help, I wanna ride this thing tomorrow..
 
hahahaha - I dont know mate sorry
sounds a bit like the Keihin -
search the lectron threads
Can you use the one from the mikuni?
Got the 165 eh ? Id run it with the mikuni first at least then you can make a comparison to Lectron :thumbsup:
and will know where you are with jetting - may need slightly leaner jetting
Id go with smallest pilot jet you have and leave main as it is to start off
Ash
 
Haha, nah 165 and lectron are both on... Fully assembled just started but it dies under revs.
Just got dark so can't tune it now. Do the keihins have a retainer for Tue throttle cable or just free at the top?
It's been in the shed for too long, it needs to be punished.
 
nah, at the moment if you grab the cable and pull it revs the bike up, i.e. like twisting the throttle...
on every other carb i've seen there is a retainer on the carb which secures the outer plastic of the throttle cable, to stop ^^^ that happening.
does everyone replace the cable as part of installing the lectron? is the stock cable not compatible or something?
 
I secured it by winding electrical tape over the steel bend and the outer cable.

primarily to seal it from water that could enter this way but also to make a fixed connection of the outer cable and the housing.

so far it holds and performs well.

to make it really nice I will re do it with heat shrink it simply seals and put it firm in place and will last.
Robert-Jan
 
There is a 90 degree cable that screws into the he carb top and several carb top options.

MP%20cable%20complete.jpg
 
You must log in or register to reply here.
Back
Top