250-500cc Kick stand replacement.

[sned2502st]

Lost mine, very expensive to replace with OEM. Longer bolt with nylon nut on the extra threads sticking out the back should never fall off again.

 

[mattmcphail]

Has anyone bought an after market stand? I picked up a 2012 WR300 with no kick stand on it. OEM is usually pricey so looking for a good aftermarket recomendation if you have on.

 

[duey]

Still looking myself might fab one myself they are spendy

 

[giantjoe]

I lost my kickstand spring. I hold up the stand with a KTM rubber thingy now, although I installed it poorly and have been using zip ties to make sure the stand doesn't fall. Maybe I'll just ditch the stand entirely.

 

[huskylove]

Anyone know where to get a husqvarna te449/511 style frame tab for the kickstand??

I have a stock TE kickstand I would like to install on my 2000 cr125. I need the tab and bolt tho.

 

[rockdancer]

Any ideas for a replacement stand ?
Mine was bent to far forward and now its been bent / snapped and modified to straight its not going up past the swing arm

 

[juicypips]

Take it off put it in a vice an give it a blow with a mallet to get clearance.

 

[ohmygewd]

Sometimes (and over time), the metal frame tag gets bent out as well...bit of heat and the knockometer does the trick.

 

[rockdancer]

It snapped trying to heat and bend back to original shape .
They rewelded it but the angles are wrong now in the other direction -
I can possibly get it reshaped but the guy doesn't think its going to work
I was wondering about alternatives

 

[juicypips]

Trees, triangle or try a universal one.

 

[ohmygewd]

You got a pic Rocky?

 

[rockdancer]

its ok I ll get him to have another crack or take it to someone else
I wouldn't mind a pic or pics of what the angle of the join near the bolt is supposed to be

 

[hesutton]

I too have been looking for a kickstand. OEM or otherwise. My '14 WR300 didn't have the kickstand on it. The dealer had no idea where it was or what happened to it. I use trees, triangle stands and bike stands, but a kickstand is nice to have.

I've looked for aftermarket sources, but, not found anything. Even posted a "wanted" add in the classifieds here. No luck.

Heath

 

[rockdancer]

You could try one of these
look a bit cheap and not a great design but may be ok
They are cheap

http://www.ebay.com/itm/Universal-Motorcycle-Clamp-On-Side-Kick-Stand-/381546792605

 

[justintendo]

You could try one of these
look a bit cheap and not a great design but may be ok
They are cheap

http://www.ebay.com/itm/Universal-Motorcycle-Clamp-On-Side-Kick-Stand-/381546792605

oh lord..

I too have been looking for a kickstand. OEM or otherwise. My '14 WR300 didn't have the kickstand on it. The dealer had no idea where it was or what happened to it. I use trees, triangle stands and bike stands, but a kickstand is nice to have.

I've looked for aftermarket sources, but, not found anything. Even posted a "wanted" add in the classifieds here. No luck.

Heath

i take it you have tried someone like halls and they arent available??

 

[rockdancer]

I think OEM is over $200 AUD

 

[ohmygewd]

its ok I ll get him to have another crack or take it to someone else
I wouldn't mind a pic or pics of what the angle of the join near the bolt is supposed to be

Rocky, do you need a pic of the where the stand bolts onto the frame or stand join itself?

 

[rockdancer]

If your stand is on the bike a close up of the stand near the bolt from the side angle - if you can

 

[hesutton]

i take it you have tried someone like halls and they arent available??

Hard to justify the cost of OEM.

Heath