• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

250-500cc Issues with my apt smart carb!

DON SIMMS

DON SIMMS

Husqvarna
B Class
Just wanted to find out if I was alone with my issues. I have a 38mm apt cast smart carb and after 4-5 rides the slide starts to stick really bad. More towards wide open. This isn't the first time I've had the issue. They took the carb back and went through it completely last time. Now it's doing it again and I've sent them 10+ emails, Facebook messages and calls with no answer! Just wanted to see if anyone has had this issue or problems with customer service.
 
They had a disgruntled employee take down their sight and web pages with some kind of attack. Smart carb has since split off from APT and is an independent company. Here is their new website:

https://technologyelevatedco.com/

and facebook page:

https://www.facebook.com/technologyelevated/

You should get a quick reply from either site.

EDIT: The problems with their website, e-mails, and facebook page were just the rumors that I heard, not official, so take that with a grain of salt.
 
Man that sucks sorry to hear of issues specially for what a cure these were supposed to be.

Cant help either as im non APT.
 
wallybean said:
They had a disgruntled employee take down their sight and web pages with some kind of attack. Smart carb has since split off from APT and is an independent company. Here is their new website:

https://technologyelevatedco.com/

and facebook page:

https://www.facebook.com/technologyelevated/

You should get a quick reply from either site.

EDIT: The problems with their website, e-mails, and facebook page were just the rumors that I heard, not official, so take that with a grain of salt.
Click to expand...
Thanks for the info man. I sent them another message on Facebook and dropped them an email
 
I have a lectron and the slightest amount of water keeps the slide also sticking

have it pretty much sealed on all openings (except air intake and reed opening)
yet through some water crossings where a little water enters trough the air filter I have still the same issue

have the Idea of polishing the slide surfaces a bit yet i am not 100% convince that that would solve the problem

Robert-Jan
 
R-J van Hulst said:
I have a lectron and the slightest amount of water keeps the slide also sticking

have it pretty much sealed on all openings (except air intake and reed opening)
yet through some water crossings where a little water enters trough the air filter I have still the same issue

have the Idea of polishing the slide surfaces a bit yet i am not 100% convince that that would solve the problem

Robert-Jan
Click to expand...

With Lectron, polishing with Scotch-Brite pad is ok and recommended by them for any similar issues :cheers:
 
I'm sure you do but I whack a heap of oil, 2t or tranny whatever is closest, on slide if it comes out. Never stuck but don't get that cold here either
 
Cant see how a little bit of water getting through the filter can stick a slide unless it freezes, Yes if there is grit getting through its gonna stick.
My lectrons are ploughing through this every time I go out here in our rather damp UK weather and the filters get soaked but still have never tried to stick once, If you pull the filter you can actually see the water in the carb to airbox boot and damp on the slide but the bikes never miss a beat .

IMG_1834.jpg
 
Thats not a creek Robert ! Thats a good old UK flooded byway or green lane as they are so named, No deviating from the given track, you either have to ride through it or turn round and go home or your breaking the law. To make matters worse all the 4x4s are also legal to drive along them leaving huge deep wheel tracks under the murk that can and will swallow your bike lol.
 
You must log in or register to reply here.
Back
Top