All 2st Is there an aftermarket kick stand for the wr300?

[apariah]

Well it finally did break, but it wasn't for kickstarting. I actually have that under control now thanks to tje jetting advice. But I got really stuck today and in the end the kickstand was broken at the mounting point.

I can't find a aftermarket stand anywhere. Is there a stand from another bike that might fit. Well I did that trail tech has a kickstand arm, but I don't know how if that will work with out the springs and all.

 

[Bill502]

My buddy put a Trail Tech on his WR250 and it worked out for him.

 

[apariah]

My buddy put a Trail Tech on his WR250 and it worked out for him.

Any idea which model?

 

[Bill502]

I think a 2010 WR250 ill try to get in touch with him later today.

 

[apariah]

I think a 2010 WR250 ill try to get in touch with him later today.

I spoke with trail tech they said they don't make anything these bikes. I'm going to see if I can get a ktm versions to work.

 

[Bill502]

There doesn't seem to be much aftermarket stuff for these Italian Huskys out there.Have you Tried Halls they may have an oem one on the shelf?
There was an an aftermarket one that clamped on the swing arm but I'm not a fan of those.Keep an eye on Ebay also.
Bill

 

[apariah]

I talked to them a couple of weeks ago, they didn't seem to have a lot available.

There doesn't seem to be much aftermarket stuff for these Italian Huskys out there.Have you Tried Halls they may have an oem one on the shelf?
There was an an aftermarket one that clamped on the swing arm but I'm not a fan of those.Keep an eye on Ebay also.
Bill

 

[Bill502]

Put a wanted ad in the classifieds here maybe some one will be parting one out.

 

[Speedlabdan]

In another thread I recommend using a txc aluminum stand, I'm using the stock stand off my 13 TXC310R on my 2010 wr300 and the only issue is the foot is angled up slightly. It's working out fine if you can find one.

 

[Dirtdame]

Also information here: http://www.cafehusky.com/threads/kickstand.90954/

and Wallybean mentioned that he had some kickstands, so you might want to PM him.

 

[apariah]

As usual, thank you.

Also information here: http://www.cafehusky.com/threads/kickstand.90954/

and Wallybean mentioned that he had some kickstands, so you might want to PM him.

 

[apariah]

Any idea if this might work?

https://www.ebay.com/itm/2013-13-15...687994&hash=item4b8036175a:g:RHQAAOSwgntfRebY

 

[apariah]

This was the final solution. https://www.instagram.com/p/CJZnnpFMdda/?igshid=1ibj094ki9xmo

 

[Speedlabdan]

Did you have a different tab welded on?

 

[apariah]

No, but I did have a stop added to make sure the stand didn't travel further than I wanted. It cost 40.00 plus the cost of the Tusk Stand, and 7.00 in parts from Lowes. The springs and bolt and lock nut with a few washers. So far it seems to work well, and its been on a couple rides already.

Did you have a different tab welded on?