Ibeat software and cable

[Joliet]

I dont know enough about it to comment. The plug on the cable in the picture looks exactly like the plug on my Husky. I offered him $200. He countered with $250. I, since the offer, put the power up kit on my bike and as far as I am concerned, done with my tuning. It runs perfect. If he comes back and offers it up to me at $200, which he might, I will buy it and check it out. I think it should come in the tool kit with the bike straight from the showroom.

We should have went in together on it. Mine has not been hooked up to IBeat since it left the factory(The dealer didn't have IBeat yet when I bought my bike). I would like to hook mine up and play with it. Next time call me. Later, Ken

 

[dags]

Could the cable owner post some photos of the cable? If we could get a pin map of the wires it should be pretty easy to duplicate.

Not as easy as you may think, the dongle is where the problem will hit

That likely violates the end user license agreement for the software. I know it violates all the EULA's of the software I produce and almost all commercial software I've ever seen.:ride:

EULA is violated when changes are made to the system. You can make something to view, but as soon as it modifies - agreement broken

 

[dags]

One bummer is that you need a computer with a serial port and although I am not very savy, I think most newer laptops are all USB. I read somewhere that the software runs best on XP as well. That could be very unreliable information though.

XP Yes, it doesn`t like Vista,
Just buy a quality adaptor & the USB works fine

 

[gandalf]

EULA is violated when changes are made to the system. You can make something to view, but as soon as it modifies - agreement broken

Well, I haven't read the EULA and maybe you have, but most commercial software only allows you to make one copy of the software for backup purposes. Sometimes they allow you to also use an additional copy on another computer that belongs to you as long as you are not using in on both computers at the same time. My only point is that before you share a copy of the disk on a public site, you might want to read the EULA to make sure you aren't in violation and then handle accordingly(not in public).

I am thinking the EULA doesn't allow you to just duplicate the software for use with any cable be it homemade or purchased. If it did, they'd just produce it to work only read only(demo mode) and make you pay for a serial number to open up the write mode.

 

[davep01]

XP Yes, it doesn`t like Vista,
Just buy a quality adaptor & the USB works fine

I'm running Ibeat on Vista Business no problem at all on a HP laptop.
Have also used ECU reflash tool on same machine without issue.

 

[Wyatt00021]

Husqvarna Husky ECU iBeat Adapter and Software Ver 2.1 Mikuni EFI bikes 07-12


http://www.ebay.com/itm/Husqvarna-H...e-Ver-2-1-Mikuni-EFI-bikes-07-12/222659066817