• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc Husqvarna Wre 125 2005 Problem Mikuni Tmx 38

Bartlomiej24

Husqvarna
A Class
Hi, I have such a problem, I wanted to mount a mikuni tmx 38 in my 125 wre from 2005, I bought a union from wr 8000A2804 and a filter rubber from wre, after installing the carburetor does not agree with the rubber but I have to stretch it every time after disassembly, and now I have a question, what could be wrong? Do I have to buy another connector or just a rubber?

Sorry for my bad english :)
 
sorry i dont quite understand. you bought the intake manifold (38mm) from the wr but it still doesnt fit? or it doesnt fit into the airbox?
 
Some had the same issue as you with the air boot from the air box to the carburator that tends to crush and remain crushed. To solve you have to buy the wr air boot cod. 800086888
 
Back
Top