• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Husqvarna Te 310 2011 Not Working...

B

Bartlomiej24

Husqvarna
A Class
Hello from poland i have a problem with husqvarna te 310 on injection mikuni
my girlfriend was riding 2 weeks ago and suddenly the bike died
I checked:
compression
fuel
new spark plug
resistance stator 0.6ohm
resistance the ignition coil, spark is ok
valve clearence in 0.15 ex 0.20
timing setting with time sensor
the electrical system seems ok
on Ibeat i have settings:
CO
100
100
100
Tps: ~990mv on cold engine, before my tuning tps was ~870
0 errors
the bike is trying start with no results
well.. could the driver be corrupted? I'm running out of ideas?
I can upload video when i try to start the engine
 
An engine is simple but still a pain in the A sometimes. If it has spark, its propably something with the fuel. If not its the electrics. On these bike the harness isnt bullet proof. Though you have spark so most likely you have problems with the injector or something around it. Does it gets fuel? Bad fuel pump? Clogged fuel line? Unscrew the injector and see if it works. I have no other idea.
 
Fuel is ok, when i try start engine sometimes make fire on exhaust but not started. I check the injection and it give fuel fog
 
if you have the Ibeat ckeck if the engine temperature is correct, errors etc..
ckeck if the fuel pressure is ok with a tester (3bar)
 
You must log in or register to reply here.
Back
Top