husky starter help

[honda4oo]

I need help to get my 08 te 250 back on the button.I need a brush kit for it but cant find any info on it ,husky wants like 350.00 plus, for a new one .these numbers are the only ones that I can find.

 

[honda4oo]

any starter gurus out there?

 

[glangston]

Isn't it a Ducati starter?

Check with them.

http://www.roadandrace.com.au/parts/electrics/Ducati_Starter_Motor_Brushes.htm

 

[honda4oo]

thats what I thought to ...but nothing.
my 2007 te 250 is a mitsuba 14 husky change up the starter in 08......
but the 07 works in my the 08....

 

[ghte]

Have you thought about getting it repaired rather than sourcing a new or refirbished unit.

 

[MorrisBetter]

Any automotive electric shop should be able to get the brushes that you need. Or rebuild it for that matter.

 

[OlderHuskyRider]

Has anyone gotten their starter rebuilt at an auto shop, for starters and alternators?

 

[robertk61]

Any automotive electric shop should be able to get the brushes that you need. Or rebuild it for that matter.

Or even a motor rewinding shop?
I am a mechanic by trade and they look like pretty common brushes (knowing the size of a bike starter, they look like common alternator brushes (bosch etc). An auto elec should easily be able to refurbish it.

 

[OlderHuskyRider]

I just had my 2010 TE450 starter apart and it looks fine, brushes have alotta life left, fairly clean in there, shaft still greasy on the end. Put it back together and no joy, no E-start, just hangs up on the compression stroke. Tried jumping it with car battery, no joy, it's not the battery, not the wires, not the auto decomp.

 

[Catang5oh]

Starters are starters, any good auto starter shop should be able to help you out, worst case they may have to file down some brushes to fit your starter but most do that on a daily basis.

 

[OlderHuskyRider]

If I could be sure that rebuilding my starter would fix my problem, I'd pay $100, but I think that would be $100 down the drain. My starter spins the motor, with the compression release pullled in, but cannot get over the compression stroke.

 

[ScottyR]

Call or email Rob Lang at Ross Rocher Sales in Ontario. We have a used TE250 engine that we are parting out. I am also 90% sure have a new starter in stock that we can make you a deal on.

rob@rossrochersales.com or (519)393-6660

 

[Runner]

At the risk of stating the obvious, be sure you run the starter on a bench from a HIGH CURRENT 12 V. power supply. It won't work otherwise.

 

[thanos12]

I need help to get my 08 te 250 back on the button.I need a brush kit for it but cant find any info on it ,husky wants like 350.00 plus, for a new one .these numbers are the only ones that I can find.

Does anyone know where I can find the plastic brush holder for this ducati model starter....Also I can't find the part throught the part number(shown on picture)!PLEASE HELP!
Thank you!

 

[richie lee]

did you manage to get the parts. my 2011 te449 has developed a problem with the starter motor as well.

 

[honda4oo]

did you manage to get the parts. my 2011 te449 has developed a problem with the starter motor as well.

nope bought a used one off of e bay .... less than half price problem solved

 

[richie lee]

hi there,i managed to find the parts for the starter at a quad shop today cost £30.00 for the parts. my brushes were less that one quarter the length of the new ones. cleaned all the parts and its back on the bike and cranking like a new one. took a load of pictures if anyone wants a look in the future. very tight getting the starter off the te449,had to take all the bolts out of the engine mounts,slack the exhast bolts and sub tank,then lever the engine to one side with bits of wood to get it out. tight but doable lol.

 

[thanos12]

Have anyone find the starter motor brushes or the holder?Thank you

More photos https://imageshack.com/a/pOZz/1

 

[glangston]

http://ricksmotorsportelectrics.com

Might be worth a contact.

 

[thanos12]

I send them an email.I will wait their response.Thank you.