Husky makes a 13.5ltr tank??

[Sandgroper]

Has anyone purchased one of the factory tanks listed on their website?
Would the TE or TC 510 tank fit a TXC 510?

13ltrs = 3.5 galons

http://www.husqvarna-motorrad.de/index.php?id=726&no_cache=1&modelId=36&show=specialparts

 

[glangston]

I asked Hall's about that and they said it's a mis-print and that they are the IMS tanks, 3.0 gal.

It is the same tank as the IMS. There must be a misprint, because I know Husqvarna is sourcing them from IMS.

Jeff Kaylor
Hall's Cycles
3801 N. Dirksen Pkwy.
Springfield, IL 62707
217-789-0107

 

[Motosportz]

The picture is not an IMS

 

[glangston]

You're right. I noticed that but just took Jeff at his word.

 

[TE310]

Look at the following....

It is a 8.1L tank for a WR or CR!

http://www.husqvarna-motorcycles.com/_vti_g5_coll.aspx?rpstry=200_

 

[Riksha]

I went an checked on 8000H1303, the tank in post #3 which is for the tc which was backordered.
The 8000H1304 tank in stock was the IMS unit for the fi te/smr. Hopefully Safari can come thru witha tank that uses the stock shrouds...

 

[Jrmobb]

The tank in post 3 looks awesome! way better than IMS It actually has style not just a bubble tank

 

[Petzi]

The tank on pic3 is a 125 tank available from Husky as an OEM part!

For the bigger 4strokes the IMS tank is available in black as OEM part.
You can choose between a TXC or TE version ... Carb or FI.

 

[JasonfromMN]

Looks like the stock shrouds will fit too! I like the way the fuel is down low, and not wider like the IMS. I wonder the $ is. Theirs all sorts of goodies on their special parts site, How would you go about ordering any of those things?

 

[Logroller]

http://www.husqvarnamotorcycles.com.au/catalogue_sp_c.php

This one doesn't look like an IMS. Pricey tank - $585 and they are 12liters, but 11.5 might be more accurate. This tank is listed for a 450.
On a similar note. I spoke to GP and MotoForza, both said they could get an IMS tank for my bike and made no mention of a Husky larger tank for my TE450.

TE/SMR - Part no. 8000H1304
TX/TWC - Part no. 8000H1303

IMS is much cheaper. I found some online for $250 shipped (3.4 gal and 3.9gal)

How would you go about ordering any of those things?

Call any dealer, like Hall's Cycle, Gpmotorcycles, MotoForza

 

[sharpie1]

Pretty sure thats just the IMS and only $300+ more than they should cost, what a bargain.

 

[Thirsty2454]

Pretty sure thats just the IMS and only $300+ more than they should cost, what a bargain.

Its an Australian site, prices are in the aussie dollar. Lucky arent we.

 

[Logroller]

Pretty sure thats just the IMS and only $300+ more than they should cost, what a bargain.

Yeah, looking at it again I would say it is as well.

Anyone know of a cheaper deal then this (US dollars)- http://www.justgastanks.com/store/index.php?main_page=shopping_cart

 

[Artful Codger]

Hi,

I'm in Oz and used my 10% discount at TT to get an IMS for the 310 from the states delivered cost was $363AU a saving of approx $180AU on R&Ds price...no offense but that is a bit of a rort.

Graeme

 

[bbcmat]

My IMS tank (translucent / white) purchased May 09 (after the "fixes" that IMS introduced) cracked on a inside 90 degree corner above the vent hole. Google the problem and I am not alone. IMO the forward wings of the tank are not supported enough to damp oscillation and fatigue cracks the tank. This is not crash damage

09 TE510.

IMS has not responded to my e-mails.(only 3 days though) I'm going to be on the phones today.

MAT